Safety Instructions
Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
•This may cause electric shock or fire.
Do not connect too many extension cords or plugs to one outlet.
•This may cause fire.
Do not disconnect the power cord while using the monitor.
•A surge may be caused by the separation and may damage the mon- itor.
Do not use the power cord when the connector or plug is dusty.
•If the connector or plug of the power cord is dusty, clean it with a dry cloth.
•Using the power cord with a dusty plug or connector may cause an electric shock or fire.
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily op- erable.
•This may cause electric shock or fire.
Installation
Be sure to contact an authorized Service Center when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc.
Failure to do so may cause serious damage to your monitor.
Place your monitor in a location with low humidity and a minimum of dust.
•Failure to do so may cause electric shock or fire inside the monitor.
Do not drop the monitor when moving it.
•This may cause damage to the product or the person carrying it.
Install the monitor base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf.
•Dropping the product may cause damage to the product or the person carrying it.
Do not place the product on an unstable or small surface area.
•Place the product on an even and stable surface, as the product may fall and cause harm to someone walking by, specifically children.
2