Operation
¦¦ Turning the TV On and Off
Press the POWER Pbutton on the remote control. You can also use the Pbutton on the TV.
¦¦ Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically |
| Plug & Play |
| |
and subsequently. | Select Language of the OSD. |
| ||
1. Press the POWER Pbutton on the remote control. |
| |||
Language | : English | r | ||
NN You can also use the Pbutton on the TV. | ||||
|
|
|
EEnter
2.Press the Ebutton, then “Select Language of the OSD.” menu is automatically displayed.
3.Press the ▲ or ▼ button to select language, then press the Ebutton. The message “Select ‘Home Use’ when installing this TV in your home.” is displayed.
4.Press the ◄ or ► button to select “Store Demo” or “Home Use”, then press the Ebutton. The message “Select the Antenna source to memorize.” is displayed.
NN We recommend setting the TV to “Home Use” mode for the best picture in your home environment.
NN “Store Demo” mode is only intended for use in retail environments. If the unit is accidentally set
to “Store Demo” mode and you want to return to “Home Use” (Standard): Press the volume button on the TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
5.Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the Ebutton to select “Start”.
NN Air: “Air” antenna signal. / Cable: “Cable” antenna signal. / Auto: “Air” and “Cable” antenna signals.
NN In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ► button, then press the Ebutton. If you have Digital cable, select the cable system signal source for both Analog and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
6.Press the Ebutton to select “Start”. The TV will begin memorizing all of the available channels. NN To stop the search before it has finished, press the Ebutton with “Stop” selected.
NN After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears. Press the Ebutton when channel memorization is complete. The message “Set the Clock Mode.” is displayed.
7.Press the Ebutton.
Press the ▲ or ▼ button to select “Auto”, then Press the Ebutton. The message “Set to daylight saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed.
8.Press the ▲ or ▼ button to select “Off”, “On” or “Auto”, then press the button.
9.Press the ▲ or ▼ button to highlight the time zone for your local area. Press the Ebutton. If you have received a digital signal, the time will be set automatically.
10.The connection method to provide the best quality HD is offered. After confirming the method, press the Ebutton.
11.The message “Enjoy your TV.” is displayed. When you have finished, press the Ebutton.