Samsung P2370HD Ghosting on picture, Cable box, Try connecting Component cables instead, Defaults

Problem	Possible Solution
Ghosting on picture.	This is sometimes caused by compatibility issues with your
	cable box.
	Try connecting Component cables instead.
Screen is black and power indicator	On your computer check: Power, Signal Cable.
light blinks steadily.	The TV is using its power management system.
	Move the computer's mouse or press any key on the
	keyboard.
Image is not stable and may	If the setting is not correct, use your computer utility
appear to vibrate when you have	program to change the display settings.
a computer connected to the PC	Your TV supports multiscan display functions within the
input.	following frequency domain:
	- Horizontal frequency (kHz): 30~81 (P2370HD),
	52.61~82.2 (P2570HD)
	- Vertical frequency (Hz): 56~75 (P2370HD),
	48~75 (P2570HD)
	- PC Maximum refresh rate (at 60 Hz): 1920 x 1080
Image is not centered on the	Adjust the horizontal and vertical position.
screen.	The screen position must be adjusted on the output source
	(i.e. STB) with a digital signal.
The picture appears distorted in the	If “Just Scan” is selected with some external devices, the
corner of the screen.	picture may appear distorted in the corner of the screen.
	This symptom is caused by the external devices, not TV.
The ‘Resets all settings to the	This appears when you press and hold the EXIT button
default values.’ message appears.	for a while. The product settings are reset to the factory
	defaults.

NN This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

English - 34