Samsung 171T, 181T manual

Page 39

Check the following items if there is trouble with the monitor.

1.Check if the power cord and the cable are properly connected to the computer.

2.Check if the computer beeps more than 3 times when booting.

(If it does, request an after-service for the main board of the computer.)

3.If you installed a new video card or if you assembled the PC, check if the installed the adapter (video) driver and the monitor driver.

4.Check if the scanning ratio of the video screen is set at 75Hz or 85Hz. (Do not exceed 60Hz when using the maximum resolution.)

5.If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Display Adapter at the "Control Panel, System, Device Administrator" and then reboot the computer to reinstall the adapter (video) driver.

Note: If problems repeatedly occur, contact an authorized service center.

Image 39

Contents SyncMaster 181T/191T/171T/171S/171V/191N Page Notational Use only a properly grounded plug and recepticle Do not use a damaged or loose plugDo not drop the monitor when moving it Place the monitor on a flat and stable surfaceSet down the monitor carefully Clean Do not place any heavy objects on the monitor Do not use or store inflammable substances near the monitorNever insert anything metallic into the monitor openings Monitor and Stand Power Cord Signal CableSyncMaster 181T Monitor and Stand Power Cord SyncMaster 191TPivot Stand and S/W CDOption Users Guide and Driver Installation CD SyncMaster 171N/191NNot available in all locations SyncMaster 171S/171V SyncMaster 181T/191T Front SyncMaster 171S/171V DVI Port Signal PortPower on/off Switch Signal PortDVI Port Connect the signal cable to the 15-pin, D-sub connector on SyncMaster 171S/171V Connecting Your Monitor Setup-General Multimedia Speaker Stand Installing Monitor Driver Installing Vesa compliant mounting Multimedia Speaker Stand SyncMaster 171S/171V Multimedia Speaker Stand Click Windows XP/2000 Driver Windows MEClick Windows ME Driver Windows XP/2000Page Microsoft Windows XP Operating System Page How to install Click Start , Setting , Control Panel Linux Operating System Microsoft Windows NT Operating SystemSyncMaster 181T/191T/171N/191N Removing the baseAttaching a base SyncMaster 171S/171V On Screen Display SyncMaster 171N/191N On-Screen Display No images on the screen. I cannot turn on the monitor Can you see Video mode not supported on the screen?Sound is too thick Screen suddenly has become unbalancedSound is too weak Sound is too sharpPage Question Control Panel, Display, SettingsSelf-Test Feature Check Judging the monitors working condition SyncMaster 171N/171S/171V/191N Judging the monitors working condition General Model Name SyncMaster 191T SyncMaster 171N Multimedia Speaker Stand Model Name SyncMaster 171S Plug and Play Capability SyncMaster 191N Plug and Play Capability EPA/ENERGY SyncMaster 181T/191T/191NPreset Timing Modes Horizontal FrequencyVertical Frequency Preset Timing Modes Horizontal FrequencyVertical Frequency SyncMaster 171N/171S/171V Horizontal Colombia United Kingdom EspañaPortugal Plug & Play ResolutionDot Pitch Interlace and Non-Interlace MethodsIC Compliance Notice RegulatoryWhat does labelling involve? Why do we have environmentally-labelled monitors?MPR II Compliance European Notice Europe onlyMercury Environmental RequirementsLead CadmiumEnvironmental requirements Flame retardants Why do we have environmentally labelled computers?Congratulations TCO DevelopmentMedical Requirement Classifications Video In / RS 232 / Video OutTransport and Storage Limitations How to install the Natural Color software How to delete the Natural Color software programNatural Color Software Program For Better Display Authority