Using the menu system
Settings
The settings menu allows you to customise the way the picture is displayed and to select the language for subtitles etc. Highlight ‘Settings’ in the main menu, then press the OK button to display the Settings menu. Press the V or v button to highlight the required option and press the OK button to select. The following table explains each option and how to change their settings. When you have completed your settings, press the BACK button repeatedly to return to the main menu.
Option | How to use |
|
|
Language |
|
This option allows you to set the language the menus appear in. | Press the V or v button to highlight |
| the required language. Press OK to |
| confirm. |
|
|
Country |
|
This option allows you to set the receiver to the country you are in. This | Press the V or v button to highlight |
setting determines the order that channels are stored during tuning. | the required country. Press OK to |
| confirm. |
|
|
Subtitles |
|
This option allows you to select which language any digital subtitles appear in | Press the V or v button to highlight |
when they are available. | the required language. Press OK to |
| confirm. |
|
|
Picture |
|
When this option is selected, the following choices are available:- | Press the V or v button to highlight |
Display Mode: Choose from 16:9 format or 4:3 format. Set to the size that | your required choice. Press OK to |
matches your TV. | select. |
Display Format: Choose between Normal or Letterbox format. | Press the V or v button to change to |
Note: When ‘Display Mode’ is set to 16:9, this option will be fixed to Normal. | the desired setting. Press OK to |
Scart Control/WSS: Choose between On, SCART Off, WSS Off and Off. | confirm. |
On: The picture from the receiver automatically appears on your TV. The |
|
WSS (Wide Screen Switching) option will be ‘On’ in this mode. This sets the |
|
TV screen format to follow the broadcasters transmitted setting. |
|
SCART Off: The picture from the receiver will not appear automatically on |
|
your TV. To view the picture you will have to set the TV to the AV input to |
|
which your receiver is connected. In this setting the WSS will remain ‘On’. |
|
WSS Off: The picture from the receiver automatically appears on your TV, but |
|
the screen format will depend on the TV setting. |
|
Off: The picture from the receiver will not appear automatically on your TV, |
|
and WSS will be ‘Off’. To view the picture, set the TV to the AV input to which |
|
your receiver is connected. |
|
TV Output: If SMARTLINK is set to ‘Off’, choose the type of output you wish |
|
the receiver to send to your TV. Choose from RGB, PAL or Y/C. |
|
If SMARTLINK is set to ‘On’, the receiver selects the best quality output |
|
available on your SMARTLINK TV according to the output type selected. |
|
Auto: Allows SMARTLINK to select the best quality picture . |
|
RGB: Allows SMARTLINK to choose between RGB or PAL. |
|
PAL: Sets the output to PAL. |
|
Y/C: Allows SMARTLINK to choose between Y/C and PAL. |
|
Video Output: With SMARTLINK ‘Off’, this will always be set to PAL. |
|
If SMARTLINK is set to ‘On’, the receiver selects the best quality output |
|
available on your SMARTLINK VCR according to the output type selected. |
|
Auto: Allows SMARTLINK to select the best quality picture. |
|
PAL: Sets the output to PAL. |
|
SMARTLINK: Choose between On or Off. When set to ‘On’, the SMARTLINK |
|
function is enabled. (refer to ‘TV Output’ and ‘Video Output’ settings). |
|
|
|
Digital Audio |
|
This option allows you to choose the type of audio output from the ‘Audio line | Press the V or v button to highlight |
out’ socket on the rear of the receiver. | ‘Dolby Digital’ or ‘Stereo’. Press OK |
| to confirm. |
|
|
Note: If your receiver is connected to SMARTLINK equipment, and the SMARTLINK option is set to ‘On’ some of the settings you have made may be overridden (refer to page 19).
10
Using the menu system