Sony VTX-D800U manual Getting started, Connecting your TV and VCR, Connecting a Hi-Fi etc

Getting started

Connecting your TV and VCR

Note: Before connecting your TV and VCR, ensure all equipment is disconnected from the mains supply.

CAUTION - TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE THE COVER. FOR QUALIFIED PERSONNEL ONLY

VTX-D800

VTX-D800

Loop through cable

Connecting a Hi-Fi etc.

*To TV scart	To TV aerial
socket
	socket

To RF OUT socket

*To VCR scart	**To RF IN
socket
	socket

*When connecting SMARTLINK equipment, please refer to page 19.

**If you do not have a VCR, connect the loop through cable directly to your TV aerial socket.

Connect your Hi-Fi to the audio output socket of the receiver as shown.

Note: Depending on your Hi-Fi equipment, you can use either a conventional 3.5mm jack plug lead or an optical lead (mini TOS) when connecting your Hi-Fi to the receiver.

Do not connect your headphones to this socket.

Inserting batteries into the remote control

1

Push and lift up the release clip to remove the battery cover.

2

Insert the supplied batteries as indicated inside the battery compartment.

Getting started

7