![](/images/new-backgrounds/1278913/27891331x1.webp)
Using the menu system
Technical Information
Manufacturer Information
This is an information screen only and tells you the current version of software installed in your receiver.
1Enter the Technical Information menu from the main menu. ‘Manufacturer Information’ will be highlighted. Press the OK button to select. The Manufacturer Information display appears.
2After viewing the information displayed press the BACK button repeatedly to return to the main menu.
Signal Strength
This is an information screen only and shows the signal strength of the broadcast you are watching.
1Enter the Technical Information menu, highlight ‘Signal Strength’ and press the OK button to select. The Signal Strength display appears.
2After viewing the information displayed press the BACK button repeatedly to return to the main menu.
Software Upgrade
Periodically Sony will issue upgrades for the software that was initially installed in your receiver. These upgrades will automatically be received and enabled. If desired, you can disable this option as follows:
1 Enter the Technical Information menu, highlight ‘Software Upgrade’ and press the OK button.
2Press the V or v button to highlight ‘Off’ and press the OK button to confirm.
Note: Sony recommend that you always leave this option set to ‘On’.
Upgrades will only occur when the receiver is switched on and is out of Standby.
Feature Pages
This option gives you an
1With ‘Feature Pages’ highlighted in the main menu, press the OK button to display a ‘Welcome’ screen. Press the V or v button to view each feature. The example shown is the EPG.
2When you wish to return to the main menu press the BACK button.
14
Using the menu system