Antec Fusion Remote Black user manual Hard disk Drive Installation, Device Installation

Picture 2

c.Navigating iMEDIAN HD

Use the 4-way buttons to navigate iMEDIAN HD. Holding the left and right buttons will take you to the “Home” and “Menu” screens

d.Local Media

Users can easily enjoy music, videos, and pictures on their PC by using just the remote control. IMEDIAN HD supports every essential internal codec.

e.Network Media

Users can easily enjoy media files on other local PCs as well as Inter- net radio.

f.CD/DVD

Users can listen to CDs or watch DVDs

g.TV

Users can watch and record digital/analog TV channels by TV card on the PC.

h.Tasks

Users can check RSS news feeds, world city time and weather, man- age their files, set an alarm, and shut down their system

i.Settings

Users can change and adjust settings such as GUI, Media Playback features, and more

Hard disk Drive Installation

There is a hard disk drive bracket with soft silicone grommets inside the HDD chamber. It can hold two hard drives.

1.Remove the HDD bracket from the chamber by removing the two screws on top of it.

2.Mount the left side of your hard drives (as viewed from the front of the hard drive) onto the drive bracket through the top silicone grommets with the special screws provided (see picture 2).

Note: Do not over-tighten the screws as this will reduce the vibration and noise-dampening ability of the silicone grommets. Always mount the HDD with the thicker side of the silicone grommets facing the hard drive.

3.Drop the HDD/bracket assembly back into the case. Each hard drive should rest on two soft silicone grommets preinstalled at the bottom of the case.

4.Fasten the bracket using the screws provided.

5. Connect 4-pin Molex or SATA power connectors on the power supply to the power connectors on each of the devices.

5.25” Device Installation

This case comes with one 5.25” external drive bay right under the LCD.

1.Remove the flip-up drive cage.

2.Insert the 5.25” device into the lower 5.25” drive bay of the cage. Make sure to use the rear set of screw holes on the cage to mount the device. Fasten the drive with the screws included.

5