Sylvania SSD800 Recording Function, Viewing and Recording Same Program, Timer Recording

Page 20
Record safety tab

RECORDING FUNCTION

VCR

It may be UNLAWFUL to record copyrighted materi- al without the consent of the copyright owner.

Accidental Erasure Prevention

To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with cellophane tape.

¡If a tape ends during OTR, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER SET light blinks. (If the DVD power is off, the VCR will become STANDBY status).

¡When OTR is finished , the VCR turns off automatically. To use the VCR again, press the TIMER SET button on the VCR.

Before recording, make sure:

¡The desired channel is selected by pressing the

Number buttons on the remote control or the CHANNEL buttons (o/p). (If you connected the VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, set the VCR to channel 3 or 4 i.e. the same channel as the CH3 or CH4 switch on the back of the VCR. Then, select the channel you want to record with the cable box or satellite box. In this case, you can ONLY record and view the SAME channel.)

¡There is a tape with a safety tab in the VCR.

¡The desired recording speed is selected in SP (stan- dard play) or SLP (super long play) mode by press- ing the SPEED button on the remote control.

 

Tape Speed

 

Recording/Playback Time

 

Type of tape

T60

 

T120

T160

 

SP mode

1 hour

 

2 hours

2-2/3 hours

 

SLP mode

3 hours

 

6 hours

8 hours

¡TV STEREO or SAP is selected.

VIEWING AND RECORDING

THE SAME PROGRAM

VCR

1Begin the recording by pressing the RECORD button. The REC/OTR Light comes on.

TIMER RECORDING

VCR

You may set the VCR to start recording while you are away. You can set seven programs to record on specif- ic days, daily or weekly within a 1 year period.

If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET" section on page 18. Then, set the timer recording.

1Insert a tape with its safety tab intact.

2Press the MENU button.

3Select "TIMER PROGRAMMING" by pressing the PLAY or the STOP button. Then,

press the F.FWD button. The set

TIMER PROGRAMMING

PROG.

1234567

up screen is displayed.

DATE

 

START TIME

 

END

TIME

 

CHANNEL

 

REC SPEED

4Set the timer.

¡If you make mistakes, press the REW button repeat- edly to go back to the item you want to correct.

¡If you press the REW button after step 7), all the information you’ve just entered for that program number will be cleared.

¡To temporarily stop recording or to resume it, press the PAUSE button. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.

2Press the STOP button when the recording is completed.

¡If a tape ends during recording, the VCR will automati- cally stop, rewind, and eject the tape.

OTR (One Touch Recording)

VCR

This feature allows you to set the recording length simply by pressing the REC/OTR button on the VCR.

3Press the REC/OTR button to begin OTR. The REC/OTR Light comes on. Change the recording length by pressing the REC/OTR button repeatedly.

REC

OTR(0:30)

OTR(1:00)

(Normal recording)

 

 

OTR(8:00)

 

OTR(7:30)

1) Set the program number (1-7)

 

PROGRAM NUMBER

4

 

 

 

DATE

 

- - / - -

 

A program number which is not allocated

START

TIME - - : - -

- -

END

TIME - - : - -

- -

flashes. Press the PLAY button or the

CHANNEL

- -

 

REC SPEED

- -

 

 

 

 

 

STOP button repeatedly for the desired

 

 

 

 

program number. Then, press the F.FWD button.

 

 

 

 

 

 

 

2) Set the frequency of the recording

 

 

 

Press the PLAY button or the STOP

PROGRAM NUMBER 4

button to select the desired frequency from

 

ONCE

 

ONCE, DAILY, or WEEKLY recording.

 

DAILY

 

 

WEEKLY

 

Then, press the F.FWD button.

 

 

 

 

 

 

3) Set the date

 

ONE TIME PROGRAM

 

 

 

PROGRAM NUMBER

4

First, press the PLAY button or the STOP

DATE

 

- - / - -

- -

START TIME

- - : - -

- -

END TIME

- - : - -

- -

button for the month. Then, press the F.FWD

CHANNEL

- -

 

REC SPEED

- -

 

button. Next, press the PLAY button or the

STOP button for the day. Then, press the F.FWD button.

– 20 –

EN

1L25

Page 19 Page 21
Image 20
Page 19 Page 21
Contents SSD800 Laser Safety Important Safeguards Supplied Accessories Symbols Used in this ManualAbout Copyright Refers to playback of video cassette tapesTable of Contents IndiceFeatures DVD ModePrecautions VCR ModeAbout the Discs Playable DiscsExample Following discs cannot be played back on thisOperating Controls and Functions Power Button Number Buttons DVD modeVCR mode Display Button DVD modeFWD Button DVD mode Play Button DVD modePause Button DVD mode SKIP/CH. Buttons DVD modeLoading the Batteries Display Displays DuringOperation VCR/DVD Switching Switching to VCR Mode Switching to DVD ModeConnecting to a TV HookupsDVD/VCR to TV Connection If your TV does not have A/V terminalsFor TVs with Component Video in Jacks Combination Units Setup Automatic Channel SET UPTo Preset the Channels Again To Select a Desired ChannelClock SET UP To Change the ON-SCREEN LanguageTo ADD/DELETE Channels ¡To go back one step, press the REW buttonPlayback Function Normal PlaybackSearch Functions Auto Repeat PlaybackTimer Recording Recording FunctionViewing and Recording Same Program OTR One Touch RecordingHints for Timer Recording To Stop AN Automatic Timer PRO- Gram Already StartedTo CHECK, CORRECT, or Cancel AN Automatic Timer Program To Clear a ProgramSpecial Features Copying a Video TapeMTS Multi-Channel Television Sound System To Monitor the RecordingUsing the DVD Menus Playing a DiscAuto Rewind Playing a DVD Video Or AN Audio CDUsing the Title Menu Pausing Playback or Displaying a Still PictureResuming Playback from Point Where Playback Stopped Stepping Through FramesFast FORWARD/REVERSE Slow MotionStarting from a Desired Track Playing from a Desired Title or a ChapterRandom Audio CD Starting from a Desired Time CountMarker Repeat You can define a section to be played back repeatedly¡The starting point a will then be Repeat Selected ¡The selected section will be Played back repeatedlyProgram Audio CD Zoom PlaybackEnlargement on-screen To Clear the ProgramPlaying AN MP3 Disc When a Track is selectedWhen an Album is selected ¡The random setting menu screen will appear Playing a Desired Track From AN MP3 DiscPlaying AN MP3 Disc in a Program Playing AN MP3 Disc Randomly¡The current audio status will appear at the top SettingsChanging the Audio Language or Sound Mode Changing the Subtitle Language Changing the Camera Angle Multi-Angle PicturesChanging the ON-SCREEN Display Black Level SettingsTruSurround Settings Changing the Setup Items Language SettingsDisplay Settings Auto Power OFF Default onAudio Settings When playing a disc with copyright protectionAll parental lock is cancelled Parental LockLanguage Code List Language Country codeTroubleshooting Guide Problem Corrective ActionHandling Precautions Disc HandlingSpecifications Controles DEL Funcionamiento Y SUS Funciones Botón Power Botón Title Botón SetupBotón Mode Botón Search Mode Modo DVDBotón VCR/TV Botón Play Posición VCRBotón VCR Botón Pause Posición de TV Modo DVDCambio DE VCR/DVD Cambio AL Modo VCRConexiones PreparaciónReproduciendo UN DVD Video O UN CD Audio Reproducción DE UN DiscoPreparación DE Reloj H9229UD Tel0VMN03254
Top Page Image Contents