Sylvania SSD800 owner manual Playing a Disc, Auto Rewind, Playing a DVD Video Or AN Audio CD

Page 23

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play- back, or fast-forward, the tape will automatically rewind to the beginning. After rewinding finishes, the VCR will eject the tape.

¡The VCR will not rewind the tape automatically dur- ing timer recording or One Touch Recording.

¡This shows the elapsed recording or playback time in hours, minutes, and seconds. (The displayed time will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound further than “0:00:00” on the tape counter.

PLAYING A DISC

PLAYING A DVD VIDEO

OR AN AUDIO CD

DVD CD

Getting started

Turn on the power of the TV, amplifier and any other components which are connected to the DVD. (Change the input system to suite the DVD, and check that the sound volume is correct).

1Press the POWER button.

¡The power will turn on.

Check that the DVD OUTPUT Light is lit. If not press the DVD button on the remote control to switch to DVD mode.

2Press the OPEN/CLOSE button.

¡The disc loading tray will open.

3Place a disc into the tray.

¡Make sure the disc is sitting properly in the correct recess, with the label side up.

Notes

¡A “prohibited icon” may appear at the top-right on the TV screen during operation, warning that a prohibited operation has been encountered by the DVD or the disc.

¡If a disc is dirty or has scratches, the pictures may appear distorted and the playback operation may stop. In such cases, clean the disc and unplug the power cord and then plug it again before resuming playback.

¡With DVDs that use titles for playback program signals, playback may start from the second title, or it may skip these titles.

¡During the playback of a two layered disc, pictures may stop for a moment. This happens when the 1st layer switches to the 2nd layer. This is not a mal- function.

USING THE DVD MENUS

DVD

Some DVDs contain their own menus, such as a guid- ance menu which describes the contents of the disc or a selection menu for sound, language and other cus- tomized settings.

4Press the PLAY button.

¡The tray will close automatically, and playback will then start from the first chapter or track of the disc. You need to press the PLAY button only when the tray has been closed by pressing the OPEN/CLOSE button.

¡If your DVD has a title menu, it may appear on the screen. In this case, refer to “USING THE DVD MENUS” in the next section, or “USING THE TITLE MENU” on page 24.

1Press the MENU button.

¡The DVD menu will appear.

2Select the desired title.

¡Press the Arrow buttons (L/K/B/s) to change the setting, and then press the ENTER button.

3Playback will start from the selected title.

5Press the STOP button to stop play.

– 23 –

EN

1L25

Image 23 Contents
SSD800 Laser Safety Important Safeguards Refers to playback of video cassette tapes Supplied AccessoriesSymbols Used in this Manual About CopyrightIndice Table of ContentsDVD Mode FeaturesVCR Mode PrecautionsFollowing discs cannot be played back on this About the DiscsPlayable Discs ExampleOperating Controls and Functions Display Button DVD mode Power ButtonNumber Buttons DVD mode VCR modeSKIP/CH. Buttons DVD mode FWD Button DVD modePlay Button DVD mode Pause Button DVD modeLoading the Batteries Display Displays DuringOperation Switching to VCR Mode Switching to DVD Mode VCR/DVD SwitchingIf your TV does not have A/V terminals Connecting to a TVHookups DVD/VCR to TV ConnectionFor TVs with Component Video in Jacks Combination Units To Select a Desired Channel SetupAutomatic Channel SET UP To Preset the Channels Again¡To go back one step, press the REW button Clock SET UPTo Change the ON-SCREEN Language To ADD/DELETE ChannelsAuto Repeat Playback Playback FunctionNormal Playback Search FunctionsOTR One Touch Recording Timer RecordingRecording Function Viewing and Recording Same ProgramTo Clear a Program Hints for Timer RecordingTo Stop AN Automatic Timer PRO- Gram Already Started To CHECK, CORRECT, or Cancel AN Automatic Timer ProgramTo Monitor the Recording Special FeaturesCopying a Video Tape MTS Multi-Channel Television Sound SystemPlaying a DVD Video Or AN Audio CD Using the DVD MenusPlaying a Disc Auto RewindStepping Through Frames Using the Title MenuPausing Playback or Displaying a Still Picture Resuming Playback from Point Where Playback StoppedPlaying from a Desired Title or a Chapter Fast FORWARD/REVERSESlow Motion Starting from a Desired TrackRandom Audio CD Starting from a Desired Time CountMarker ¡The selected section will be Played back repeatedly RepeatYou can define a section to be played back repeatedly ¡The starting point a will then be Repeat SelectedTo Clear the Program Program Audio CDZoom Playback Enlargement on-screenPlaying AN MP3 Disc When a Track is selectedWhen an Album is selected Playing AN MP3 Disc Randomly ¡The random setting menu screen will appearPlaying a Desired Track From AN MP3 Disc Playing AN MP3 Disc in a Program¡The current audio status will appear at the top SettingsChanging the Audio Language or Sound Mode Changing the Camera Angle Multi-Angle Pictures Changing the Subtitle LanguageChanging the ON-SCREEN Display Black Level SettingsTruSurround Settings Language Settings Changing the Setup ItemsAuto Power OFF Default on Display SettingsWhen playing a disc with copyright protection Audio SettingsParental Lock All parental lock is cancelledLanguage Country code Language Code ListProblem Corrective Action Troubleshooting GuideDisc Handling Handling PrecautionsSpecifications Controles DEL Funcionamiento Y SUS Funciones Botón Search Mode Modo DVD Botón PowerBotón Title Botón Setup Botón ModeBotón Pause Posición de TV Modo DVD Botón VCR/TVBotón Play Posición VCR Botón VCRCambio AL Modo VCR Cambio DE VCR/DVDPreparación ConexionesReproduciendo UN DVD Video O UN CD Audio Reproducción DE UN DiscoPreparación DE Reloj H9229UD Tel0VMN03254