Kramer Electronics VP-747 user manual Switching/Scaling of an Input

Understanding the VP-747

8.2.1The Transition from Preview to Program

The transition can occur in one of two modes1:

•The Swap2 mode (shown in Figure 9), in which the PREVIEW input buttons and the PROGRAM input buttons switch places after pressing the TAKE button. For example, in Figure 9 the PROGRAM input button 3 would switch to 2 and the PREVIEW input button 2 would switch to 3, so the RGBS source is displayed on the PROGRAM screen and the Component source is displayed on the PREVIEW screen.

•The Follow mode in which the PROGRAM input button is switched to the same position as the PREVIEW input button after the TAKE button is pressed

8.3Switching/Scaling of an Input

The VP-747scales the selected sources3 to HDMI, RGBHV or YUV and VGA simultaneously. It switches seamlessly between sources using the selected special effects, which include cuts, fades, and wipes. Select the appropriate source (from channel 1 to 8) via the Input command in both the Preview Setting OSD screen and/or the Program Setting OSD screen (see Section 9.1.1), via the IR or front panel pushbuttons, or via the serial or Ethernet control.

1 As selected via the Transition OSD Menu, see Section 9.1.2 2 Swap mode is the default for the VP-747

3 Composite video, s-Video, component video (sometimes called YUV or Y, B-Y, R-Y or Y, Pb, Pr ), RGB/YUV, RGBS, RGsB, or RGBHV

22 KRAMER: SIMPLE CREATIVE TECHNOLOGY