Operating the
9.1.4.1 Save Lock
The Save Lock qualifies the Panel Lock1. When set to On, the status of the Panel lock is saved on power down, and then recalled when the unit is turned on again2.
9.1.4.2 Input Lock
The Input Lock qualifies the Panel Lock1. When set to On, the 8x2 Input buttons and the TAKE button are included in the buttons which are locked3 when the Panel Lock is on.
9.1.4.3 Save/Recall/Erase Setting Commands
You can save/recall/ up to 8 settings. In each setting you can preserve the entire machine’s settings4. All parameters are saved/recalled, including the Universal Input configurations, ProcAmp settings, output resolutions, and so on. You can also erase a single setting or all of them.
9.1.5The Information Menu Items
From the Info screen (see Figure 17), you can verify the program and preview source, video type and video standard as well as the PIP program and PIP Preview source, video type and video standard. The Info screen also displays the Preview and Program output resolutions.
Figure 17: Info Screen
1 For a description of how to lock the front panel using the PANEL LOCK button, see Section 8.5
2 If the Save Lock is OFF, the Panel Lock will be OFF when the machine is powered up (even if the Panel Lock was ON before the power was turned OFF)
3 If the Input Lock is ON, access to the front panel buttons is blocked when Panel Lock is On, including the PROGRAM and PREVIEW INPUT selector front panel buttons, and the Program and Preview IR remote transmitter keys. When Input Lock is Off, then you can still access the 8x2 Input buttons and the TAKE button, even if the Panel Lock is On
4 This is useful, for example, for configuring the machine for multiple presentations. Up to 8 presentation configurations can be saved in the machine’s memory
34 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |