Basic multiplexer functions

Using the basic multiplexer functions

This function is used to activate multiplexer functions using the buttons on the front panel.

DIGITAL ZOOM button

Camera number buttons

SPLIT screen buttons

SEQUENCE button

OUTPUT A/B button

Move buttons

•The sequential display is cancelled when a different type of split screen or single screen is selected.

•Pressing the OUTPUT A/B button on the front panel switches the multiplexer video output. When OUTPUT A is selected, the button light indicator is off. When OUTPUT B is selected, the button light indicator is on, and camera number buttons, SPLIT screen buttons, and SEQUENCE button are operated for the monitor screen connected to the OUTPUT B connector. Pressing the OUTPUT A/B button again switches the multiplexer output to OUTPUT A.

4.DIGITAL ZOOM button

Pressing this button in single screen mode displays the screen at 100%. At this time, the magnification center point (X) appears. Pressing the button again switches the magnification to 200%, and then 400%. By pressing the MOVE buttons, the center point moves vertically or horizontally.

When the DIGITAL ZOOM button is pressed, camera number buttons 11, 14, 15, and 16 move the “X” in the screen.

Multiplexer buttons

1.Camera number buttons (1 to 16)

Displays the picture supplied from the cameras connected to CAMERA IN terminals 1 to 16 on the rear panel in the single screen display.

•Pictures can be displayed even if the camera is not set to record.

2.SPLIT screen buttons

Displays the split screen in the following order. SPLIT4 ( ) button : SPLIT 4aSPLIT 4b

SPLIT 4cSPLIT 4dSPLIT 4a

• • •

SPLIT9 () button : SPLIT 9aSPLIT 9b

SPLIT 9a• • •

SPLIT10 () button : SPLIT 10aSPLIT 10b

SPLIT 10a• • •

SPLIT13 () button : SPLIT 13aSPLIT 13b

SPLIT 13a• • •

SPLIT16 () button : SPLIT 16 screen

3.SEQUENCE button

Displays the sequential screen in the split screen or the single screen display. Make the detailed settings of this display in the <Multiplexer Setting> (Setup Menu SystemMultiplexer Setting). Sequential display does not appear during playback.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Basic operations