Mitsubishi Electronics DX-TL5000U user manual Recordable time and product warranty

Page 7

WARNING:

The supplied power cord is used for 120 V only. Never connect to any outlet or power supply having a different voltage or frequency.

Notice about construction of the surveillance system using this unit

This unit can be controlled by the external devices via RS-232C terminal or LAN terminal. This unit can also be used to control external devices via external terminal, RS-422/485, or RS-232C terminal. Owning to these functions, this unit flexibly applies to the high grade security system, but the whole surveillance system may be affected by the malfunction of this unit or the external devices depending on the setting contents of this unit, or the connection or combination between the external devices.

When configuring a surveillance system using this unit, it is recommended to confirm first that this unit operates normally with the other devices connected.

It is recommended to copy or back up the important recorded contents.

Damages rising out of any operational error of the surveillance system or loss of the recorded data or any other damages because of any user malfunction of this unit are not covered.

There may be cases when the unit’s built-in MOTION DETECTION function does not operate properly due to external condition or video input signal or other factors.

The user will not be indemnified for problems (e.g., recording failure or playback failure) that occur with either the unit or a connected device during operation. It is recommended that backups of important recordings are made regularly as a precaution against possible breakdowns and accidents.

Recordable time and product warranty

Continuous recordable time and the estimated time displayed on the menu screen is the continuous recordable time when operating this unit and is not the product warranty period. Furthermore, it is not the period that guarantees life time at the unit.

This unit uses a built-in hard disk, which is a precision device. Please handle this unit with sufficient care.

Do not subject this unit to vibrations or shocks. This may cause trouble specially when the power of the unit is turned on or when the hard disk is being accessed, and sufficient care is required.

Do not disconnect the power plug while the power of the unit is turned on or while recording or playing.

For early detection of faults, we recommend that you request inspection once a year.

The hard disk and cooling fan are not permanent items and will need replacing with time. When operated in an ambient temperature of 25 °C, it is recommended that both of the hard disk and fan are replaced every 30,000 hours.

(This figure is only a guide, and should not be taken as a guaranteed lifespan of the products. Use the <Elapsed Operating Time> (System Menu Service Info) as a guide to perform checkups.)

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Beginning

3

Image 7
Contents DX-TL5000U Page Beginning AvertissementImportant safeguards Servicing Damage requiring ServiceReplacement Parts Safety CheckUnplug the Power Cord During a Long Absence Recordable time and product warranty Disclaimer Contents Page Software License Agreement Setting a menu with a mouse How to set the menusSetting the menus Setting the menu using a mouse Setting a mouseClosing a menu screen Displaying a menu screenSelecting an item For some items, more detailed setting is required Using the front buttons of the unitUsing a mouse Setting parametersAddress number using the front buttons of the unit Symbols in the menusTime/Date Setting Setup Menu System Time/ Date Setting Setting the time and dateSet the present month, date, year, hour, minute, and second Split screen buttons Using the basic multiplexer functionsBasic multiplexer functions Digital Zoom buttonCascade Using the cascade functionTo control the other recorder, repeat steps 1 and 2 above PTZ control using the front panel buttons PTZ control using the menu User Menu PTZ ControlControlling the camera Set the normal recording menu Recording the picture manuallyBasic manual recording Execute camera checkTo stop playback, press the Stop button Playing back the recorded dataBasic playback To change the playback deviceBasic search Searching the desired pictureSearch by Time and Date Search by Alarm List Copy Data to Copy 2 Drive/Set Copy 2 Drive Copying the recorded dataCopy User Menu Copy Copy Data to Copy 1 Drive/Set Copy 1 DriveSet the start time of copy Copying the data of this unit to a video cassetteOperational panel Playback softwareSystem requirements Starting up the application softwareView menu Search menuOperation menu Bookmark menuPersonal computer product requirements LoginCommunications by Web Browser Communications by Web BrowserMain Menu Live Monitoring Image Search Alarm List SearchPlayback Time SearchUser Registration Configuration MenuRecorder Title & Camera Titles Mail SetupEnter the desired recorder or camera title to New Text NAS Setup Clock SetupSelect NAS Setup and left-click Logout Change Login UserClose the Web Browser Installation Recording TroubleshootingOthers Cancelling Countermeasure Cancelling Log number 872C279B5
Related manuals
Manual 8 pages 45.69 Kb Manual 143 pages 49.43 Kb