Mitsubishi Electronics DX-TL5000U Playback, Time Search, Alarm List Search, Image Search

Playback

Retrieves, plays back and searches for pictures that have been recorded by the recorder.

1.Select “Playback” and left-click.

• The “[Playback]” screen appears.

•The function of searching for recorded picture data is effective only when the single-screen display has been selected in the “Playback” menu. The function cannot operate during picture data playback so to make a search of any type first stop the playback.

2.Press the button to start playback. <Function description>

: Press to start playback.

: Press to start speed search in the forward direction at speeds of x2, x4, x8 and x16.

: Press to frame-by frame playback in the forward direction.

: Press to start reverse playback.

: Press to start speed searches in the reverse di- rection at speeds of x2, x4, x8 and x16.

: Press to frame-by-frame playback in the reverse direction.

: During playback or searching, press to stop playback for still frame.

Device : Selects the HDD for playback and search. (default: Normal)

•The date, time, and the camera number for the picture acquired are displayed in “Image Information.” Clicking “Save Image” stores the picture that is freeze- frame displayed in the PC in bit map format.

•The following searches can be selected in single- screen display.

•Time Search

Select the date and time and click “Search.”

•Alarm List Search

Click “Alarm List” and the “Alarm List Search” screen will appear in the sub-screen.

1.Set the desired date/time and number of alarm list items to be acquired, and then click “Refresh” to acquire the alarm list.

•The alarm list cannot be acquired without clicking “Refresh.”

•Enter the needed number of alarm list items to be acquired in “Alarm Cnt.” If number entered is too large, it may take a long time to acquire the list or the desired number of list items may not be acquired depending on the recording condition.

2.Select the “No.” desired, and then click “Search.”

•Click “Prev(number)” for a search in the reverse direction and click “Next(number)” for a search in the forward direction.

Click “Refresh” again to re-acquire the “Alarm List,” and click “Close” to hide the “Alarm List Search” menu.

Sensor : Check the desired sensor number to acquire the alarm list items.

•Image Search

Click to display the picture of the next alarm list item.

Click to display the picture of the previous alarm list item.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Communications by Web Browser

27