JVC BC-D2300U manual 1FRAME-90H, No USE, Memory Default, Remote-In, Alarm

MENU SETTINGS

Menu contents (contd.)

			[ ]: Factory Setting
Items	Settings		Contents
Colorimetry	OFF	Turns the colorimetry parameter conversion function ON/OFF. This function
	[ON]	allows SD (ITU-R601) to be converted to HD (ITU-R709).
		Normally, set to ON.
		When this function is set to OFF, the normal display format changes. ( p. 5)
Out Delay	[1FRAME]	Sets the delay time from the input to the output.
	1FRAME-90H	1FRAME	: Delays by 1 frame (33.37 ms).
		1FRAME-90H : Delays by 1 frame -2.67 ms for 1080I. Delays by 1 frame
			-2.00 ms for 720P.
Audio Group	NO USE	Selects the audio signal group (groups 1 to 4) multiplexed on the SD digital serial
	[1]	input signal.
	2	If audio is not used, select No Use.
	3
	4
Audio Delay	–30	Sets the delay for the audio signal multiplexed on the SD digital serial input
	…	signal.
	[0]	Adjustment of ±30 (msec.) is possible with respect to the delay time set with
	…	<Out Delay>.
	30
Profile Save	MEMORY 1	Four independent memories are provided to store menu settings.
	MEMORY 2	Selects the memory to be used to store the set menu contents.
	MEMORY 3	* Items in the administration sub menu are not stored in memory.
	MEMORY 4
Profile Load	MEMORY 1	Recalls menu setting stored in memory.
	MEMORY 2	When set to DEFAULT, menu setting set before shipment is recalled.
	MEMORY 3
	MEMORY 4
	DEFAULT
Color Bar	[OFF]	When set to ON, the built-in color bar (7-line color bar) is output regardless of the
	ON	input.
		The color bar output turns off automatically when you quit this menu.

Menu contents (contd.)

			[ ]: Factory Setting
Items	Settings		Contents
Administration		Press the [ENTER/MENU] button to enter the administration sub menu.
		The following nine items can be set on the administration sub menu.
Remote ID	[1]	Sets the remote ID of this unit to remote-control this unit from the Host.
	…
	31
Remote Speed	9600	Sets the transmission speed (bit/s) of the remote control signal.
	19200
	[38400]
Remote Port	[REMOTE-IN]	Selects the connection port for the host when this unit is remote-controlled.
	ALARM	REMOTE-IN : Connects RS-485 to the [REMOTE-IN] port.
			Set to this position to remote-control this unit via the
			[REMOTE-IN] connector.
		ALARM	: Connect the RS-232C to the [ALARM] port.
			Set to this position to remote-control this unit via the [ALARM]
			connector.
Active Line	480	Sets the number of effective lines of the input signal when <Output> is set to
	[486]	“1080I”.
		With <Output> set to “720P”, the number is fixed at 480 lines (on the menu, --- is
		shown).
Alarm	OFF	When set to “OFF”, the output from the rear panel’s [ALARM] connector stops
	[ON]	(always open except when power is turned off).
Name	[BC-D2300]	Sets the device name that will be shown in the normal display.
		For setting, refer to page 9.
Version		Shows the firmware version of this unit.
Serial No.		Shows the serial number of this unit.
License key		Sets the license key to enable optional features such as the variable enhancer
		and color compensation function.
		For setting, refer to page 9.
		To obtain the license key, consult your JVC dealer.
Running Time		Shows the approx. number of operating days of this unit.
		Press the [ENTER/MENU] button twice to clear this number to 0.
		Use this as a guide for determining when to replace the fan.

14 15