Timer Recording
Program skip using the POWER button
If you have entered only one program into your VCRÕs memory, you can skip the program without going into the VCRÕs menus. Simply press POWER on the front panel once. The programmed recording light will turn off, and the program will be skipped. If you decide not to skip the program, press POWER on the front panel twice, the programmed recording light will light up again.
Changing timer recording settings
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear. Press the ADJUST buttons to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor arrow next to the program you wish to change. Press ENTER. You will see the Program to record setting menu.
3Press ENTER repeatedly to select the item you wish to change. Use the ADJUST buttons to change it. Then press ENTER repeatedly to return the altered program to the Recap screen.
4Press MENU twice to exit the menus. Then press POWER to turn off the VCR. Make sure the programmed recording light is on.
Canceling a timer recording before the recording starts
1Press MENU on the remote control. Your VCR will turn on and VCR Main Menu will appear on your screen. Use the ADJUST buttons on the remote control to select Program to record. Press ENTER.
2Recap screen will display for 4 seconds. While this screen is displayed, press the ADJUST buttons to place the cursor next to the program you wish to cancel.
3Press CANCEL. The program is erased.
4Press MENU twice to exit the menus.
Memory backup
If the VCR is without power for 3 minutes or less, it will retain the clock and the programmed settings. The VCR must have been plugged in for at least an hour beforehand to charge this backup. If the power is lost for more than 3 minutes, the time and the programmed settings will be lost.
If you have set the Auto Clock set setting of the Set the clock menu to ON, the auto clock function will automatically set the clock again when power is restored.
Recap screen
ÂProgram to record
CH | DAY | ON | OFF |
¤ 2 | MO11 | 11:30am | 1:30pm SP |
| º¹MENU to go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
ÄChannel | 2 | ||
ÄDay |
| Monday 11 | |
ÄStart time | 11:30am | ||
ÄStop time | 1:30pm | ||
| ÄRecord speed | EP | |
º¹MENU to | go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
Recap screen
ÂProgram to record
CH | DAY | ON | OFF |
¤ 2 | MO11 | 11:30am | 1:30pm SP |
| º¹MENU to go back | ||
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
29