Editing Features
Using Two VCRs to Copy
There are two basic ways to make a copy of a tape.
One way is to use the
The other way is to use another VCR to record and use the
Regardless of which method you may choose, you will need one RCA audio cable and one RCA video cable to connect the two VCRs. If you do not have these cables, they are available at your local electronics dealer.
Using the HS-U448 to record from another VCR
1Connect the audio cable to AUDIO OUT L and R on the playback VCR and to AUDIO IN L and R on the
2Connect a video cable to VIDEO OUT on the playback VCR and to the VIDEO IN on the
3If the playback VCR is
4Use INPUT to set the
5Put a blank tape into the
6Put the tape you want to copy into the playback VCR and find the cue point. Press STOP if the picture starts playing.
7On the
8On the playback VCR, press PLAY, then
PAUSE.
9Press the PAUSE buttons on both VCRs at the same time to begin copying the tape.
10When finished, press STOP on both VCRs.
RECORDING | PLAYBACK | |||
VIDEO IN L/MONO - AUDIO IN - R |
|
|
|
|
L R | AUDIO IN 2 R | AUDIO OUT L | L | R |
VIDEO | AUDIO IN 2 L/MONO | AUDIO OUT R |
| VIDEO OUT |
IN 2 |
|
|
|
|
30