Location of Controls
Front Panel Display
PWR. REC
VCR
PM
POWER light : PWR.
Is lit when power is ON.
VCR light : VCR
Indicates that the picture is controlled by the VCR.
Cassette light :
Lights up when a tape is in the VCR.
time display
This area displays:
¥current time
¥OTR and OTR2 timer
Record light : REC
Lights up when the VCR is recording. Flashes when the VCR is in recording pause mode.
Programmed recording light :
Lights up when VCR is off and it is programmed to record.
PM light : PM
Lights up when the current time or start time of OTR2 is in the afternoon.
Turns off when it is in the morning.
Rear Panel Jacks
AUDIO
OUT IN 1
R R
L L/MONO
VIDEO
OUT IN 1
ANTENNA
IN
OUT
AUDIO INput and OUTput jacks
Red and white jacks for receiving (IN) and sending (OUT) audio signals. Red signifies the right channel, and white signifies the left channel. Stereo audio cables are also color coded red and white. If you are receiving or sending a mono
VIDEO INput and OUTput jacks
Yellow jacks for receiving (IN) and sending (OUT) video signals to a monitor TV or from another VCR.
ANTENNA IN jack
Attach an external antenna or cable to bring in an outside signal.
ANTENNA OUT jack
Attach a coaxial cable to your TV to send out antenna/cable signals from the VCR to your TV.
46