Timer Recording
Changing while programming
To change one of your settings (such as start time) while you are programming:
Press ENTER to move forward through the program list. Press CANCEL to move backward.
Then use the ADJUST buttons to change the setting.
You will cancel the entire program if you press CANCEL while the channel number is flashing.
Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies the process of programming your VCR to record. When you press QUICK PROGRAM on the remote control, you will immediately see the Program to record menu and can begin programming right away.
You can use this feature even when the VCR is stopped, playing, fast forwarding, rewinding, or off. (Quick program does not work while a tape is recording.)
1Press QUICK PROGRAM on the remote control. If the VCR is off, it will turn on. After tuning your TV to the correct channel or input, Program to record menu will appear.
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.
2Complete steps 3 through 9 in Conventional VCR timer recording. (See page 24.) When you have finished, press QUICK PROGRAM again.
If the VCR is stopped, it will turn off and be ready to record your program at a later time.
If the VCR is playing, fast forwarding or rewinding, the menus will turn off, but the VCR power will remain on.
3When you are finished with all programming, check the following:
¥If you have a cable box, leave the box turned ON and tuned to the station you wish to record. Additionally, if you are using an A/B switch, remember to set the switch to the correct position.
¥Make sure the VCR is turned OFF and the programmed recording light is lit before the recording time.
IMPORTANT
If you press QUICK PROGRAM, but the clock is not set, Set the clock menu will appear. Set the clock manually.
7 8 9
0
forward
ENTER
backward 
ADJUST
CANCEL
adjust
ADJUST
1 | 2 | 3 | QUICK PROGRAM |
4 | 5 | 6 | |
7 | 8 | 9 |
|
| 0 |
|
|
ÂProgram to record |
| ||
| ÄChannel |
| |
| ÄDay |
| |
| ÄStart time | ||
| ÄStop time | ||
| ÄRecord speed | AUTO | |
º¹MENU to go back
¶¹¹ADJUST to select ²´³¹ENTER to enter · ¹¹ADJUST to select
ÂProgram to record
CH | DAY | ON | OFF |
¤ 2 | WE13 11:30am | 1:30pm SP | |
10 | TH14 | 9:00pm | 10:00pm EP |
7 | 8:00am | 9:00am EP | |
12 | FR15 | 5:30pm | 5:45pm EP |
8 | TU19 11:00pm | 0:30am SP | |
13 | 7:00pm | 7:15pm EP | |
15 | SU31 | 8:00pm | 9:00pm EP |
46 | SU17 | 7:00am | 9:00am SP |
Recap screen
26