Mitsubishi Electronics LT-37131 manual Ieee 1394 Devices Symptom Remarks

Page 100

100Appendices

Appendix C: Troubleshooting, continued

IEEE 1394 Recording

Symptom

Remarks

4. Cannot record to or from the IEEE 1394

• To initiate a recording to IEEE 1394 device, press the

device, including dubbed recordings.

(RECORD) key. The Record menu displays allowing setup of

 

the recording.

•The source device for the recording is not powered on.

•When dubbing, the destination device for the recording is not powered on.

•The program is copy protected.

•The program has already been recorded once and the copy protection only allows one recording.

•Unapproved source device for copy protected material.

•The recording device can not decode the copyright signal included in the signal source (try another device if available).

•The playing device (for dubbing) does not support copy- righted material.

•Source for recording is copyrighted

•Too many IEEE 1394 devices in network. Insufficient band- width available. Disconnect unused devices.

•Source Device has higher speed (S 400) than record device. If possible, reverse devices, play in the slower device and record in the faster device.

IEEE 1394 Devices

 

Symptom

Remarks

 

 

1.

Excessive digital artifacts appear when

• The IEEE 1394 cable is too long; 15 feet between devices is

 

viewing an IEEE 1394 device.

 

the maximum.

 

 

• There may be a slow device in the middle of the IEEE 1394

 

 

 

network. Move the slow devices to the end so that connec-

 

 

 

tions for faster devices do not pass through them.

2.

D-VHS recordings for digital cable have

Digital cable signals on IEEE 1394 can exceed the data rate stan-

 

drop-outs (loss of picture or sound), or no

dards supported by DVCR.

 

playback.

 

 

 

 

 

 

3.

There is no audio and video from the IEEE

•

The device is not turned on. Turn the device power on.

 

1394 device.

• No media (tape or disc) is inserted into the device.

 

 

• The media is blank (has no recording).

 

 

• The play command failed - Try pressing play again on the

 

 

 

device’s remote control or front panel.

 

 

• The device is already in use (for example, the device is cur-

 

 

 

rently recording).

 

 

• The source is copy-protected or violates copy protection.

 

 

• The device’s digital video signal is not supported by the TV,

 

 

 

as may be the case with an IEEE 1394 signal from a com-

 

 

 

puter. Use analog connections instead, if available.

 

 

• The device is not an audio/video device.

 

 

• Too many other devices are already communicating over IEEE

 

 

 

1394. Remove or stop some devices and try again.

 

 

 

4.

The IEEE 1394 Device is no longer listed in

• The IEEE 1394 plug is disconnected or loose.

 

the Input Selection menu.

•

The IEEE 1394 device has not been powered on. Turn on.

 

 

• The device has not been discovered.

 

 

• The device is not an audio/video device

 

 

 

 

Page 99 Page 101
Image 100
Page 99 Page 101
Contents LT-37131 LT-46131 U T I O N Serial Number Purchase Date Model Number check one LT-37131 LT-46131Retailer Name Location Contents TV Menu Settings Operating Other Devices with the Remote ControlUsing the TV with a Personal Computer Using Ieee 1394 DevicesDemo Mode Stand RequirementOperating Notes If Your TV Gets DamagedLCD Screen Cleaning General Cleaning WarningsTop and Sides of the TV Unauthorized SoftwareImportant Safeguards Read, Retain and Follow All InstructionsPower Lines Wall Mount Kit Stand Removal InstructionsTo order a Wall Mount Kit PSM-2031 Package Contents Special Features of Your TV Television OverviewPackage Contents Special Features of Your TVGuidelines for Setting Up and Using Your New Widescreen TV Additional TV SetupDigital Cable Ready CableCARD Getting StartedTurning the TV On or Off Controlling Sound VolumeChanging Channels TV Front Panel, Power Button and Indicators System Reset ButtonReset Front Control PanelStatus Indicator POWER/TIMER IndicatorLED Color TV Condition Additional Information Using a CableCARD CableCARD menu Network SetupCableCARD Technology CableCARD MenuBack and Side Panels Component 1 and 2 InputsANT 1/MAIN ANT 1/MAIN and CableCARD Audio and VideoBack Panel Located next to DigitalAudio Output jack Audio onlyHdmi 1 DTVLINK/IEEECableCARD Slot Do not connect a computer to either TV Hdmi jackTV Connections Before You Begin Choosing a Language for MenusMore About Auto Input Sensing Ieee 1394 ConnectionsDigital Video and Home Recording Connection Type into the TV Effect on Home RecordingPicture Quality Name Signal Type Connection TypesVideo and Combined Audio/Video Connections Audio-Only ConnectionsCable Management Hdtv Cable Box or Satellite Receiver with Component Video Wall Outlet Cable no cable box Can be used with a CableCARDAntenna with a Single Lead Antennas with Separate UHF and VHF LeadsFor an antenna with flat twin leads For cable or antenna with coaxial leadVCR to an Antenna or Wall Outlet Cable OptionalConnecting a VCR to a cable box VCR to a Cable Box Audio & VideoConnecting an Hdmi device Receiver Stereo System DVD Player with Component VideoTo connect an analog A/V receiver Older Cable Box CamcorderTV Connections TV Operation Remote Control OverviewRecord/Playback Keys VOLSleep Timer Battery InstallationLow Battery Indicator Resetting the Remote ControlUsing ChannelView Feature InstructionsChoosing a Program Source ChannelView Channel ListingsStatus Display Analog ProgramDigital Program Digital Ieee 1394 DeviceTV Signals and Picture Formats Signal DefinitionsDVD Definitions TV Picture Format DefinitionsTV Picture Formats Operation Split ScreenSplit Screen Operations Instructions Split Screen Displays TV Inputs for Split Screen1394 Hdmi 1 IeeeManual and Power Swivel To use the Power Swivel feature for LT-37131TV Menu Settings 3D Graphical Menu System Remote Control ButtonsMenu Screens Main Menu Setting the Clock Manually Setup MenuSetting the Clock Automatically Device ChannelOn/Off Set DayInput Name Menu Icon Order MenuDVD DVD2 VCRChannel Menu TerminologyFAV Setup Using the Channel Menu Using FAV ChannelsFAV Setup Using Only the Remote Control FAV Channel MenuCaptions Menu FontSize ColorBackground Opacity FontLock by Time Parental Lock Menu Parental Lock MenuFront Panel Lock Parental Lock Menu Ratings Menu Other Ratings MenuBypassing the Ratings Lock and Lock by Time TV Content Categories Chip Signal InformationTV Ratings Audio/Video Menu Analog and Digital Audio Settings Analog-Only Audio SettingsDigital-Only Audio Settings Ieee 1394 Amplifier SettingsPersonal Computer Video Settings Contrast BrightnessTV Menu Settings Operating Other Devices with the Remote Control Functions Available for Other A/V Devices Programming the Remote Control Method 1 Code EntryMethod 2 Code Search Code VerificationProgramming Codes Audio Lock Universal A/V Receiver ControlAudio Amplifiers Brand Code Receivers Brand CodeKLH CD Players Brand CodeLXI Cable Boxes Brand CodeNSC DVD Players/Recorders Brand CodeJSI Laser Disc Players Brand Code Satellite Receivers Brand CodeVCRs and DVRs Brand Code ABSSTS Page Using the TV with a Personal Computer Video Adjustments SetupTo Remove the Computer Icon from the Input Selection Menu Computer with DVI Monitor Output Connecting a Computer to the TVComputer with Hdmi Monitor Output Connecting a computer with a VGA 15-pin monitor output Computer with VGA 15-Pin Monitor Output Analog VideoAdjusting Image Resolution Select Control Panel640 X Displays available for your computer’s video signalFormat Reduced Standard Using Ieee 1394 Devices Direct Device-To-Device Method OverviewHub Connection Method Tips for Connecting Ieee 1394 Devices Ieee 1394 AmplifiersIeee 1394 Devices and the Input Selection Menu Ieee 1394 CamcordersImmediate Recording from the Recording Setup Menu Time-Delayed Recording from the MenuRecording to Ieee 1394 Recordable Devices Recording Now from the MenuTime-Delayed Recording from ChannelView To Cancel a Recording in ProgressTo Cancel a Scheduled Recording Immediate Recording from ChannelViewTo Power On or Off a Compatible Ieee 1394 Device TV Remote Control and Ieee 1394 DevicesOperation of Ieee 1394 Devices with the TV’s Remote Control Retention Period DiscsTo Copy or Move a Track to Another Ieee 1394 Device Press Enter to select the device output Appendix B Specifications Appendix C Troubleshooting AppendicesPage Appendix a Bypassing the Parental Lock Bypassing the Parental LockThis page intentionally left blank Appendix B Specifications Inputs Description Qty Signal Type Input SpecificationsPicture Technology ReceptionEnviornmental Condtions Model Operating Temperature Outputs Description Qty Output SpecificationsDigital Interfaces HdmiAppendix C Troubleshooting TV Reset FunctionsReset Name When to Use How to Use Resulting Action Demo Mode Off buttonService Service and SupportSupport General TV Operation Symptom Remarks TV Channels Symptom RemarksTV Power On/Off Symptom Remarks Picture Symptom RemarksSound Symptom Remarks Indicators Symptom RemarksIeee 1394 Recording Symptom Remarks Ieee 1394 Devices Symptom Remarks Appendix C Troubleshooting Trademark and License Information Mitsubishi TV Software 103Mitsubishi LCD Flat Panel Hdtv Limited Warranty 104Index VCR Page Demo Mode MDEAservice@mdea.comSystem Reset
Top Page Image Contents