Chapter 1. Television Overview | 19 |
Back and Side Panels, continued | 7 | 6 | 5 |
|
8
9
Back Panel 1 |
| 4 |
2 | 3 |
ANT 2/AUX
ANT 1/MAIN
Back Panel 2 |
| (Located next to DIGITAL |
| AUDIO OUTPUT jack) | |
10 | 1 | |
4. AVR OUT
(Audio only)
AVR OUT (AUDIO/ViDEO RECEIVER OUT) L/R jacks send analog audio of the program currently shown on the screen to an A/V surround sound receiver or stereo system. Digital audio from digital channels, FireWire® (DTVLink/IEEE 1394) devices and HDMI devices is con- verted to analog audio by the TV. If using an analog A/V receiver or stereo system, this is the only audio connec- tion needed between it and the TV.
5. MONITOR OUTPUT
Use these composite video and left/right audio jacks to send analog video and audio signals to an external recording device such as a VCR. The signals from these jacks are from the program currently being viewed on the TV screen. To make recordings from this output, the
TV must be in normal
•From this output you can record audio and video signals from ANT 1, ANT 2, INPUT
•Digital signals from ANT 1, ANT 2, and IEEE 1394 devices are converted to analog video and audio signals.
•Some signals cannot be recorded because of
•Video signals from devices connected to COM- PONENT 1 & 2, HDMI 1 & 2 or PC DVI are not available from these MONITOR OUTPUT jacks.
6.HDMI/DVI AUDIO
Audio for HDMI 1 & 2: Use these analog audio inputs when connecting DVI devices to the TV’s HDMI jacks. Unlike HDMI, DVI does not carry audio information on the same cable. For analog audio from a personal com- puter, use the