48Chapter 4. TV Menu Settings
Setup Menu
Figure 2. Setup menu
Language (Setup Menu)
Choose to display the
To listen to audio in other languages (when available), see the “Audio Settings” section in this chapter and refer to “SAP” (analog signal) or “Language” (digital signal).
Memorize Channels (Setup Menu)
For ANT 1/MAIN and ANT 2/AUX
The memorization process performs two scans of all possible channels on the selected ANT input. Analog channels are scanned first, then the process is repeated for digital channels. Channel memorization may take up to 15 minutes to complete.
To start channel memorization
1.Highlight an input selection based on your connec- tions:
Input | Condition | |
Ant 1 | Air, | When connected to an indoor/outdoor |
Ant 2 | Air | antenna |
Ant 1 | Cable, | When connected to direct cable (no |
Ant 2 | Cable | cable box) |
|
|
|
2. Press ENTER to start automatic channel memorization.
To stop channel memorization before completion
Press CANCEL.
Channels memorized before you pressed CANCEL are retained in memory. If you restart memorization, all previ- ously memorized channels for the selected antenna input are erased and the process starts over from the begin- ning.
After channel memorization, press CH
/
to tune to memorized channels. Select the Channel menu for further channel editing, such as adding and deleting channels from memory, naming channels, and saving favorite channels in custom memory banks.
Note: If using a CableCARD™, the complete list of available channels is provided through the CableCARD and the ANT 1 option is grayed out.
Clock (Setup Menu)
Set the clock if you wish to use the TV’s Timer function or schedule delayed recordings. You can use either the manual or auto method to set the clock.
Figure 3. Clock submenu
Setting the Clock Manually
Time
With the hour highlighted in yellow characters, press 
repeatedly to slowly increment the hour and associated AM/PM indicator or press and hold to quickly increment the hour. Press ENTER to highlight the minutes in yellow.
Press 
to set the minutes.
Date
With the month highlighted in yellow characters, press 
to select the correct month. Press ENTER to highlight
the day. Press 
to select the correct day. Press ENTER
to highlight the year. Press 
to select the current year.
Time Zone
Select your correct time zone. Press 
or 
to select the time zone for your area (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii). Press 
to move to the Daylight Savings option.
Daylight Savings
Press 
or 
to select either Applies or Ignore, depending on whether or not daylight savings time is used in your area.
Note: If Clock Setting is set to Manual, each time the time change occurs, you must open this menu and set the TV’s clock ahead or back.
If you have selected Auto for Clock Setting, the TV’s clock adjusts automatically to daylight savings time.
Setting the Clock Automatically
Select the Time Zone and the Daylight Savings (DST)
options for your state. Press 
to select Applies or Ignore. You may then tune to a channel on ANT 1 or ANT 2 that uses Extended Data Service (XDS) time data,