Resolving CEC Conflicts
Because each manufacturer selects which CEC func- tions to support, some devices may conflict with other devices. If control conflicts arise, you can:
•Turn off TV control of an individual
Turn off CEC in the device itself. Refer to the device's Owner's Guide for instructions.
Turning Off the TV's HDMI Control of a CEC
Device
1, Press MENUon the TV remote control.
Highlight Inputs > HDMI Control.
3, Move to the device name and press ENTERto select Off to turn off the TV'sability to control the device.
4, Press EXiTto clear the menu.
Inputs > HDMI Control menu
Removing an HDM! Device
1, Power off the device.
Disconnect the HDMI cable.
3, Press MENUon the TV remote control to enter the TV main menu.
4, Go to Inputs > Name.
Highlight the HDMI input name and press ENTERto select Delete.
&Press EXiTto clear the menus.
Inputs > Name menu with Delete selected for
3 HDMI Control of CEC Devices | 27 |
Using HDM! Control
As an example of using HDMI Control, press PLAYon the device itself to:
•Power on the TV
Switch to the device (no need to display the Input Selection menu)
Begin play of the device
Direct Keys
Test your equipment with the TV's remote control to find additional supported commands. See the table
below for commands that may be available, depending on the individual device.
CEC=enabled VCR, DVD, and DVR functions that may be available:
,q I_AT | CN |
ENTER Digits 0=9,
CANCEL
CANCEL ENTER (to cancel)
If you have a
cable may also be controllable. They can be selected from the TV'sInput Selection menu.
CEC=enabled A/V receiver functions. Try the VOL MUTE,and
For assistance call 1(800}