263 HDMI Control of CEC Devices
HDM! Control of an HDMI A/V Receiver and Connected Devices
1, Enable HDMI Control for the A/V receiver as described in "Enabling HDMI Control of CEC Devices" on the previous page.
Power on the HDMI device you wish to connect to the A/V receiver (such as a disc player, cable box, or satellite receiver). Allow the device to complete the
3, Select the device's HDMI input on the A/V receiv- er'sfront panel controls or remote control.
4, Connect the device to the A/V receiver with an HDMI cable.
When the TV detects the connection, the New Device Found screen will appear.
Note: If the TV is unable to detect the device, either the device's CEC capability is not enabled or the device is not CEC compatible. Enable HDMI control through the device's menus before continuing. You may need to temporar- ily connect the device directly to the TV to view device menus.
G.Highlight On and press ENTERto add a check.
ZHighlight EXIT and press ENTERto close the New Device Found screen.
8.Optional: Connect the TV'sDIGITAL AUDIO OUTPUT to an input on the A/V receiver. Use this additional connection if:
*You want the ability to switch between the A/V receiver speakers and the TV speakers.
You want to use the A/V receiver to listen to devices connected to the TV only, e.g., an antenna input or camcorder.
HDMIcableOptional digitalaudio connection
AN receiverwith
HDMIoutput
if yourA/V receiverconvertsall videosignalsfor outputon HDMI,youcanuse any connectiontypesfrom external
devices;contentcan be HDor $D video.
Connecting HDMI devices. The optional digital audio connection allows you to hear audio through the A/V receiver from devices connected to the TV only.
To hear audio from a device without HDMI Control, you must manually select the correct A/V receiver input for the device.
For assistance call 1(800)