1. Basic Setup and Operation | 11 |
First-Time Power-On
Before You Begin
1.Review the important safety, installation, and oper- ating information at the beginning of this book.
2.Choose a location for your TV.
•Allow at least four inches of space on all sides of the TV to help prevent overheating. Over- heating may cause premature failure of the TV.
•Avoid locations where light may reflect off the screen.
•See the stand requirements on page 1.
3.Install the batteries in the remote control.
4.Plug the TV into an AC power outlet.
TV Tips
Turning the TV On or Off
•Point the remote control at the front of the TV and press the POWER button.
•Press the POWER button on the TV control panel.
Controlling Sound Volume
Power-On
1.Confirm that the remote control is in TV mode.
•Press the side button once to light the mode indicator and confirm that TV mode is active.
•To change, press the side button additional times to activate TV mode.
2.Aim the remote control
at the TV and press the
POWER key 
. Wait for the Welcome screen.
3.Press 
if you wish to change the menu language to Español.
4.Press 
to move to the Home/Retail selections. Here you can choose a picture mode suited to your viewing conditions.
TV
GUIDE MENU INFO BACK
GUIDE MENU INFO BACK
•Press VOLUME UP/VOLUME DN to adjust the sound level from the TV speakers.
•See also “Controlling A/V Receiver Sound Volume” on page 26.
•Mitsubishi recommends the Home setting. The Home setting selects the Brilliant Picture Mode.
•The Retail setting selects the Super Brilliant Picture Mode. The Super Brilliant Picture Mode is designed to compensate for the harsh, bright lighting used in retail settings and is not recommended for home use. Prolonged use of the Super Brilliant Picture Mode will age the lasers faster, reducing picture brightness as the TV ages.
•For more on Picture Modes, see page 38.
5.Press 
to highlight EXIT. Press ENTER to clear the menu.