Mitsubishi Electronics L75-A91, L75A81 Hdmi Control of an Hdmi A/V Receiver and Connected Devices

74Appendices

HDMI Control of an HDMI A/V Receiver and Connected Devices

Use this setup to control CEC-enabled devices con- nected to your CEC-enabled A/V receiver.

Note: Connect the A/V receiver to the TV with an HDMI cable before making other connections.

1.Enable HDMI Control for the A/V receiver as described in “Enabling HDMI Control of CEC Devices” on the previous page.

2.Power on the HDMI device you wish to connect to the A/V receiver (such as a disc player, cable box, or satellite receiver). Allow the device to complete the power-on sequence (boot up). Stop playback if the device starts playing.

3.Connect the device to the A/V receiver with an HDMI cable.

4.Select the device’s HDMI input on the A/V receiv- er’s front panel controls or remote control.

5.When the TV detects the connection, the New Device Found screen will appear.

Note: If the TV is unable to detect the device, either the device’s CEC capability is not enabled or the device is not CEC compatible. Enable HDMI control through the device’s menus before continuing. You may need to temporar- ily connect the device directly to the TV to view device menus.

6.In the TV’s New

Device Found screen, highlight On.

7.Highlight EXIT and press ENTER to close the New Device Found screen.

8.Optional: Connect the TV’s DIGITAL AUDIO OUTPUT to an input on the A/V receiver. Use this additional connection if:

•You want the ability to switch between the A/V receiver speakers and the TV speakers.

•You want to use the A/V receiver to listen to devices connected to the TV only, e.g., an antenna input or camcorder.

9.If desired, perform NetCommand IR Learning to supplement CEC functions. You must first connect and place IR emitters for the devices. See page 50.

			Cable box			CEC-enabled
						devices
			DVD player			connected with
						HDMI cables
					HDMI	DIGITAL
					OUT	AUDIO IN
			A/V receiver
			with HDMI
1			output
		RS-		HDMI
2		232C		cable
HDMI
3
4
	R	DIGITAL OUTPUT
	L Y/VIDEO	AUDIO	OUTPUT	DIGITAL
		INPUT
		L	AUDIO
		DVI/PC
		R
		AVR R			Optional digital
	Pb	AUDIO	TV	audio connection
		L
	Pr	OUTPUT
IR- Controller	INPUT 1	INPUT 2
Output/External Input		GLASSES EMITTER
NetCommand
		3D
		ANT

Connecting HDMI devices. The optional digital audio connection allows you to hear audio through the A/V receiver from devices connected to the TV only.

In Canada call 1(800) 450-6487 for assistance.