Mitsubishi Electronics PD-4225S manual Important Information, Precautions

Important Information

Important Information

PRECAUTIONS

Please read this manual carefully before using your Mitsubishi plasma TV and keep the manual handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important lit- erature concerning the operation and mainte- nance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNINGS AND SAFETY PRECAUTIONS

The Mitsubishi plasma TV is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface.

The plasma display consists of fine picture elements (cells). Although Mitsubishi utilizes plasma display panels with more than 99.99 percent active cells, there may be some cells that do not produce light or remain lit.

For operating safety and to avoid damage to the unit, please read and observe the following instructions.

To avoid shock and fire hazards:

1.Provide adequate space for ventilation to avoid internal heat build-up. Do not cover rear vents or install the unit in a closed cabinet or shelves. The unit is equipped with cooling fans. If you install the unit in an enclosure, make sure there is adequate space at the top of the unit to allow hot air to rise and escape. If this happens, turn off the power to the moni- tor and unplug the power cord. If the room where the moni- tor is installed is particularly hot, move the monitor to a cooler location, and wait for the monitor to cool for 60 min- utes. If the problem persists, contact your Mitsubishi dealer for service.

2.Do not use the power cord polarized plug with extension cords or outlets unless the prongs can be completely inserted.

3.Do not expose the unit to water or moisture.

4.Avoid damage to the power cord, and do not attempt to modify the power cord.

5.Unplug the unit during electrical storms or if the unit will not be used over a long period.

6.Do not open the cabinet which has potentially dangerous high voltage components inside. If the unit is damaged in this way the warranty will be void. Moreover, there is a seri- ous risk of electric shock.

7.Do not attempt to service or repair the unit. Mitsubishi is not liable for any bodily harm or damage caused if unquali- fied persons attempt service or open the back cover. Refer all service to authorized Mitsubishi Service Centers.

CAUTION

PD-4225S can be used with the following optional acces- sories. Use with other optional accessories is capable of resulting in instability causing possible injury.

Manufacturer’s name: MITSUBISHI DIGITAL

ELECTRONICS AMERICA, INC

Stand: MB-4225

Speakers: MS-4225

Please contact MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC for approved optional accessories.

Owner’s Manual 5