Mitsubishi Electronics 246 Series, 148 Series manual Stand Removal, Stand-Removal Procedure

1. Television Overview 11

Stand Removal

CAUTION

At least TWO PEOPLE are needed to safely remove the stand. Have one person hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury and damage to the product.

Stand-Removal Procedure:

1.Disconnect the TV’s AC power cord from the AC power outlet.

2.Spread the protective sheet that was wrapped around the TV on a flat, even surface, such as a sturdy table. The protective sheet will help prevent damage to the display.

IMPORTANT: To avoid damaging the screen, make sure there are no foreign objects under or on top of the protective sheet.

3.Position one person on each side of the TV (left and right sides). Have each person firmly grasp their side of the TV and gently place it face down on the protective sheet with the display stand hanging over the edge of the table. See the illustration to the right.

4.Use a magnetic philips screwdriver to remove the four stand screws from the recessed holes (see illustration to right). Note: A regular screwdriver can be used with a separate magnetic pick-up tool.

5.While one person holds the TV with both hands, have the other person grasp the plastic portion of the stand (see illustration to the right) and remove the stand by pulling it away from the TV in the direc- tion of the large arrow shown in both illustrations.

6.The TV is now ready for wall mounting. See “Wall Mount Kit” below.

Wall Mounting Kit (purchased separately)

To order a Wall Mounting Kit, please contact Peerless Industries, Inc. at (800) 473-3753 or visit www.peerless- mounts.com. Use wall mounting kit Model ST650.

Note: Complete instructions are included with the kit.

To order a Wall Mounting Kit from Mitsubishi Digital Electronics America, Inc., please visit www.mitsuparts.com or call (800) 553-7278.

TVStand

Protective sheet

Table

TV Back

Cover

Protective Sheet

CAUTION: Using this TV with other than the autho- rized accessories may cause the TV to become unstable, which can cause damage to the product or possible injury.