Mitsubishi Electronics 246 Series, 148 Series manual TV Main Panel

1. Television Overview 9

TV Main Panel

1. ANT 1/ANT 2 (Antenna)

HDMI

VIDEO: 480i, 480p /720p 1080i /1080p

AUDIO:

PCM STEREO

PC: VGA, W-VGA, SVGA, W-SVGA, XGA, W-XGA, SXGA / 720p/1080p

4

3

2

1

If you are connecting an antenna or direct cable service without a cable box, connect the main antenna or cable source to ANT 1. Use ANT 2 for a second source.

ANT 1 and ANT 2 can each receive digital and analog over-the-air channels from a VHF/UHF antenna or non- scrambled digital/analog cable source.

ANT 1/MAIN and CableCARD™

Use ANT 1/MAIN to receive premium subscription

8cable TV service authorized by the CableCARD™ access card. The CableCARD access card is provided by your local cable company.

2. Component Video (INPUT 1, INPUT 2)

Y Pb Pr Component Video (480i/480p/720p/1080i)

Use these jacks to connect devices with component video outputs, such as DVD players, external HDTV receivers, or com- patible video game systems. Use the adjacent AUDIO R and L jacks for INPUT 1 or INPUT 2 if you wish to send audio to the TV. See Appendix A specifications for signal compatibility.

	IR- NetCommand	S-VIDEO
12	Output / External
	Controller Input
	INPUT3
5		Pr80i)
		0
	VIDEO	p / 1

3. AUDIO L and R (INPUT 1, INPUT 2)

4Analog stereo inputs shared by more than one video input.

•INPUT 1 audio jacks are for use with INPUT 1 component video (Y Pb Pr) or composite video (single yellow cable).

•INPUT 2 audio jacks are for use with INPUT 2 component

L	Pbp/720
	0

2

video exclusively.

6	AUDIO		i / 48
			0
	R		(48
	DVI/PC	Y	Y / VIDEO
7	L		L
	AUDIO		AUDIO
	R		R
		INPUT2	INPUT1
			DIGITAL
			AUDIO
9			OUTPUT
	L	R

AVR AUDIO

OUTPUT

1

4. S-VIDEO (INPUT 3)

5Connect an S-Video device to this input. Use the AUDIO R and L jacks for INPUT 3 (item 6) if you wish to send audio to the TV.

5. Composite Video (INPUT 1, INPUT 3)

3	Use the VIDEO jacks to connect a VCR, Super VHS (S-VHS)
	VCR, DVD player, standard satellite receiver, or other A/V device
	to the TV. Use the adjacent AUDIO R and L inputs for INPUT 1 or
11	INPUT 3 if you wish to send audio to the TV. Note that the INPUT
	3 composite video jack is automatically disabled when you
			connect to S-VIDEO.
		10	6. AUDIO L and R (INPUT 3)
			Analog stereo inputs shared by INPUT 3 composite
			video and S-Video.

ANT2/AUX	ANT1/MAIN	Subwoofer output
		offered on 246
RS-232C jack		Series TVs.
offered on 246		13
Series TVs.

7. DVI/PC INPUT AUDIO

Use the DVI/PC INPUT AUDIO jack when connecting a DVI device to one of the TV’s HDMI inputs using a DVI-to-HDMI cable. These jacks allow you to send left and right analog audio from your computer or other DVI device to the TV.