Statuses of the operations (such as recording) that are started immediately by press of the corre- sponding buttons are displayed on the [Recorder Status] window (
page 19).
The buttons on the [Recorder Control] window work in the almost same way as the buttons on the digital recorder.
The [Select
For playback, click the [Playback Mode] button to activate the playback mode, and adjust the playback speed using the playback speed slider.
Note
-When you change the screen layout of the digital recorder using the [SPRIT] button, the layout set by this window may not be consistent with that is actually output from the digital recorder. In such cases, press the [SPRIT] button several times until the screen layouts become consistent. (In most cases, they become consistent each other when the [SPRIT] button is pressed several times.)
-This window doesn’t always display the status of the digital recorder correctly. To display the latest status, click the [Renew Info] button.
11.7.2 PTZ Cam Control command
When you click the [PTZ Cam Control...] command of the [Control] command in the [Network] menu, the following window will appear. You can control the camera operation using this window.
When this window appears, refreshing of live pictures and playback are automatically stopped.
This command is unavailable unless the [Control] authority described in Section 11.8.1 “User Maintenance command” (
page 32) is effective. Moreover, it is unavailable when the [SUPER USER] port of the digital recorder is being used by other user of
This command has effect only on the cameras that support the function of this command.
- 28 -