Planar PDP 42 manual Watching PIP Picture In Picture, PIP InputChanging the input signal of PIP

Watching PIP (Picture In Picture)

Press .

The followings will be displayed : Press to activate PBP at once.

PIP [Large] PIP [Small] PBP Normal

This function will work on Analog RGB, Digital RGB, Composite, S-video, and Component signals as inputs to main screen and Composite, S-Video and Component (480i) as inputs to sub-screen.

When watching PIP, the main screen and the sub-screen may have differences in the quality of screen color. PBP only works in S-Video, Composite, Component (480i) input signals.

PIP Input(Changing the input signal of PIP)

	The following sub-screen will be selected in order :
Press	. 1. Composite / 2. S-Video / 3. Component.

※Component input will display only 480i input.

PIP position (Moving the sub picture)

As you press , the location changes as illustrated next.

※If the sub-screen does not appear, (only a black screen is shown)

check to see that input terminal is connected.

PIP Swap (How to exchange the main screen from sub screen)

Press , and the main/sub screen will be exchanged.

※This does not work in Analog RGB, Digital RGB, and Component (480p, 720p, 1080i).

PIP Sound Swap (How to exchange the sound from the main to sub)

Press , the audio of the main/sub screen is exchanged.

PBP MODE (How to exchange the PBP mode)

Press , the mode of the PBP is exchanged from 16 : 9 to 4 : 3.

31