Planar PDP 42 manual Connecting to the DVI-I terminal, How to watch DTV

Connecting to the DVI-I terminal

Some of DTV receivers (Set-Top-Box) have an RGB connector (D-sub 15 pin) instead of a component output. The DVI adapter, which provides this connection terminal for the PDP, may be used for this con- nection.

Connect the DVI adapter into the VGA cable and connect to the PDP DVI-I input terminal. Connect the other end of the cable to D-sub output terminal of DTV receiver.

Connect audio cable from the audio output terminal of DTV receiver to the DVI-I audio input terminal of the PDP.

How to watch DTV

1.Turn on the PDP monitor and press on the remote controller.

2.Use to select component and then press .

3.When connecting DVI-I terminal, use to select RGB1(Analog) and then press .

4.Turn the DTV receiver on and select the channel that you want.

·DTV video output of 480p or 720p will show the clear and detail image of screen.

21