Planar PDP 42 manual ·Connecting to the DTV receiver

·Connecting to the DTV receiver

Connecting to the Component terminal/ Connecting to the DVI-I terminal

<Back view of the monitor>

Connecting to the component terminal/ Connecting to the RGB terminal

·A separate Set-Top-Box may be required to receive digital broadcasting.

·In 1080i mode of DTV mode, the screen size selection is disabled, but fixed to 16:9 the screen size does not change.

Connecting to the component terminal

Connect component video cable from the component video output terminal of DTV receiver to the com- ponent terminal (Y, PB, PR) of the PDP.

Connect audio cable from the audio output terminal of DTV receiver to the component audio input termi- nal of the PDP.

·You can make S-Video connection or AV-Input connection instead of connecting to component termi- nal. (Please refer to page 16 on connection method)

·DTV component output terminal is indicated by Y, PB, PR or Y, CB, CR.

20