Planar PD520 manual Audio, When Surround is set to On, the graphic equalizer is, Disabled

Page 46

Audio ➤

Audio

Balance

Equalizer

Surround

Digital Audio Out

Speaker

Audio Delay

To adjust the PD520 audio settings, select Audio from the Main Menu and press

ENTER.

Balance: To adjust the left/right speaker balance, select Balance from the Audio Menu and press ENTER. Use the left- and/or right-arrow buttons to make one channel louder than the other.

Equalizer: The PD520 has a five-band graphic equalizer that you can use to boost or cut certain audio frequencies. To use it, select Equalizer from the Audio menu and press ENTER. Select one of four equalizer presets – Standard (flat), Music, Film or Speech – or select Custom to create your own according to taste. The five frequency bands are 100, 300, 1000, 3000 and 10,000 Hertz (Hz).

Surround: The PD520 has a “surround sound” mode that simulates a multi-channel sound system. To use the surround mode, select Surround from the Audio menu and set it to On.

Note

When Surround is set to On, the graphic equalizer is

disabled.

 

Digital Audio Out: The PD520 can output either two or six channels of digital audio. Select Dolby Digital if your A/V receiver can decode a Dolby Digital-encoded, 5.1-channel bitstream. Otherwise, select PCM to have the PD520 output PCM-encoded, stereo audio.

Speaker: To disable the speakers, select Speaker from the Audio menu, set it to Off and press ENTER. The effect is similar to using the MUTE button, except that the PD520 “remembers” this setting if you turn off the display, then turn it back on.

Audio Delay: Use the Audio Delay control to correct audio/video synchronization issues that can occur with some types of source material. Select from 0 to 40 milliseconds of delay, as needed.

34

Planar PD520 Owner’s Operating Manual

Page 45 Page 47
Image 46
Page 45 Page 47
Contents Owner’s Operating Manual Page ONE Year Limited Warranty For Flat-Panel LCDsContact a Planar Authorized Service Center to Obtain Service Additional Information Safety Precautions Compliance Information Declaration of ConformityFCC Part Table of Contents Operation Maintenance and TroubleshootingSpecifications Serial CommunicationsList of Figures List of Figures Xii Planar PD520 Owner’s Operating Manual Introduction About This ManualUsing This Manual If you need Turn toDescription, Features and Benefits Key Features and BenefitsParts List Controls and Functions Controls and IndicatorsPD520 at a Glance Rear PC Audio Input RS-232 Control Port PD520 Remote Control PD520 Remote ControlPIP Component and composite video connectors Video connectors. Input 3 and Input 4 have bothInput 1 and Input 2 have both S-Video and composite Planar PD520 Owner’s Operating Manual Signal from the remote control can be reflected by InstallationRemote Control Battery InstallationVideo installation specialist Quick SetupInstallation should be performed by a qualified custom Step Procedure For Details, refer toAmbient Light Installation ConsiderationsWall-Mounting the PD520 Other ConsiderationsConnections to the PD520 Connecting the PD520 toSource Components Hdmi Connections Refer to Computer Signal Compatibility on page 52 for a DVD/DTV STB Connection Audio output level is fixed. The volume and muteConnecting Headphones Controls affect only the speaker and headphone outputsSpeakers Optional Connecting ExternalConnecting to a Dolby Digital AmplifierRS-232 Controller Connector Pin AssignmentsCommunications on Turning on the Power Changing the OSD Language OperationSetting the PC Display Properties Video card, whichever is lower. You can get the best Using the On-Screen MenusIs 1920x1080/60Hz or the maximum supported by your Picture at 1920x1080/60HzPD520 OSD Menu Structure Not saved independently for each input SourceAspect ratio selection persists until you change it. It is Aspect RatioRemote Aspect Ratio Control Description Key BOXSave Settings on Image AdjustAchieve the optimum setting Brightness and contrast controls are interactive. a changeSetting Controls are interactive. a change to one may require aTypical Test Pattern for Adjusting Sharpness Planar PD520 Owner’s Operating Manual Disabled When Surround is set to On, the graphic equalizer isAudio On the characteristics of the incoming signal SetupLetterbox Mode = Letterbox Installer Image AdjustDescribed on page 37 is set to On White Balance Any white balance adjustments you make here areUse it with caution Gain 100 OffsetUsing Picture-In-Picture PIP PIP Input Source SourcePosition Cleaning Maintenance and TroubleshootingTroubleshooting Tips Computer Signal Command Description RS-232 Connection and Port ConfigurationSerial Command Syntax Serial CommunicationsSAB Key 0002 0015 Key 0100 Specifications PD520 SpecificationsSpecifications are subject to change without notice PD520 Dimensions 1shows the PD520 dimensions all dimensions are in inchesComputer Signal Compatibility Signal Mode Vertical HorizontalPage 020-0705-00 Rev. a October
Related manuals
Manual 78 pages 37.73 Kb Manual 26 pages 63.41 Kb

PD520 specifications

The Planar PD370, PD420, PD470, and PD520 are a series of high-performance professional displays designed for various applications including corporate, retail, and educational environments. Each model offers unique features and characteristics that cater to different user needs, ensuring versatility and exceptional visual quality.

The Planar PD370 is a 37-inch display that excels in delivering vibrant images with its Full HD resolution of 1920x1080 pixels. Its narrow bezels allow for a sleek design, making it ideal for multi-display configurations. It supports a range of connectivity options, including HDMI, DisplayPort, and VGA, ensuring compatibility with various devices. Additionally, the PD370 features advanced color calibration technology that guarantees consistent color accuracy, making it perfect for video presentations.

Moving to the PD420, this 42-inch display enhances viewing experiences with its larger size and similar Full HD resolution. The PD420 is equipped with advanced LED backlighting, which improves brightness and contrast ratios, resulting in dazzling visuals even in well-lit spaces. It also includes built-in speakers, which is a notable feature for presentations and video playback, eliminating the need for external audio equipment. The PD420 is optimized for 24/7 operation, making it suitable for digital signage applications.

The PD470 takes productivity a step further with its 47-inch display. This model is particularly designed for collaboration, featuring touchscreen capabilities that allow for interactive presentations and teamwork. The responsive touch technology ensures smooth navigation, while the anti-glare surface minimizes reflections and provides a comfortable viewing experience. Additionally, the PD470 supports multiple input sources, allowing users to switch between devices seamlessly.

Finally, the PD520, which stands as the largest in the series with a 52-inch display, combines superior resolution with impressive multi-source input capabilities. It integrates intelligent software for enhanced content management and scheduling, particularly beneficial for retail scenarios where dynamic content is essential. The PD520 is also designed with robust durability for constant use in high-traffic environments.

Overall, the Planar PD370, PD420, PD470, and PD520 each deliver exceptional performance tailored for specific applications, boasting features such as full HD resolution, advanced connectivity options, and user-friendly interfaces. These displays are designed not just to meet professional standards but to elevate the overall viewing experience across various sectors.
Top Page Image Contents