Planar PD520 manual Installer, Image Adjust

Page 49

PC Signal: The RGB input supports both DTV and VESA (computer) resolutions and signal timings. If the RGB source is a computer, select PC. If it is a DTV set-top box or other equipment with an RGB output, select Video.

Film Mode: To smooth out moving images from interlaced, standard-definition (SD) sources, select Film Mode and set it to Automatic.

In most cases, the PD520 detects the proper “pull-down” rate and vertical frequency. However, if your source is jittery and/or tearing you may wish to specify the pull-down rate (2:2 or 3:2) to ensure stable processing for that source.

Auto Backlight: Select Auto Backlight from the Setup menu and set it to On to have the PD520 adjust the Backlight setting automatically, according to the ambient light level in the viewing area.

OSD Timer: Use the or button to set the OSD Timer. This timer controls how long the menus remain on-screen after selecting them. Select from 0 to 60 seconds, in 10-second increments. When you set the OSD to 0, the menus remain on-screen until you hide them by pressing EXIT.

Auto Off: Set Auto Off to 30, 60 or 120 minutes to have the PD520 go into standby mode when no source signal is present for the selected amount of time.

When Auto Off is set to zero (0) minutes (disabled), the PD520 remains in normal operating mode, regardless of the presence or absence of an input sync signal.

HDMI CSC (Color Space Control): If the color space of the incoming signal on the HDMI1 or HDMI2 inputs is known, select HDMI CSC from the Setup menu and set it to RGB or Component.

In most situations, the Auto setting works well.

LED: Select LED from the Setup menu to change the behavior of the front-panel status indicator LED (see Figure 2-1) during standby mode.

When set to ON, the LED lights red to indicate that the PD520 is in standby mode. When set to OFF, the LED is off when the PD520 is in standby mode.

Use the Installer menu to perform advanced picture quality adjustments.

Image Adjust: The controls in this menu are identical to those in the main Image Adjust menu.

•Brightness: Refer to Brightness on page 29.

•Contrast: Refer to Contrast on page 30.

•Color: Refer to Color Saturation on page 31.

•Tint: Refer to Tint on page 31.

•Sharpness: Refer to Sharpness on page 32.

•ADC Phase Adj.: This control works similarly to the Phase adjustment for RGB signals (refer to Phase on page 35). Use it to improve the apparent sharpness of 720p and lower-resolution Component, S-Video or Composite sources. For best results, adjust ADC Phase while displaying a “Sharpness” pattern (Figure 4-5).

Installer

Installer

Image Adjust

White Balance

Blue Enable

Baud Rate

Serial Link

Factory Reset

Planar PD520 Owner’s Operating Manual

37

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Owner’s Operating Manual Page For Flat-Panel LCDs ONE Year Limited WarrantyContact a Planar Authorized Service Center to Obtain Service Additional Information Safety Precautions Declaration of Conformity Compliance InformationFCC Part Table of Contents Specifications Maintenance and TroubleshootingOperation Serial CommunicationsList of Figures List of Figures Xii Planar PD520 Owner’s Operating Manual About This Manual IntroductionIf you need Turn to Using This ManualKey Features and Benefits Description, Features and BenefitsParts List Controls and Functions Controls and IndicatorsPD520 at a Glance Rear PC Audio Input RS-232 Control Port PD520 Remote Control PD520 Remote ControlPIP Component and composite video connectors Video connectors. Input 3 and Input 4 have bothInput 1 and Input 2 have both S-Video and composite Planar PD520 Owner’s Operating Manual Remote Control InstallationSignal from the remote control can be reflected by Battery InstallationInstallation should be performed by a qualified custom Quick SetupVideo installation specialist Step Procedure For Details, refer toWall-Mounting the PD520 Installation ConsiderationsAmbient Light Other ConsiderationsConnections to the PD520 Connecting the PD520 toSource Components Hdmi Connections Refer to Computer Signal Compatibility on page 52 for a DVD/DTV STB Connecting Headphones Audio output level is fixed. The volume and muteConnection Controls affect only the speaker and headphone outputsConnecting to a Dolby Connecting ExternalSpeakers Optional Digital AmplifierRS-232 Controller Connector Pin AssignmentsCommunications on Operation Turning on the Power Changing the OSD LanguageSetting the PC Display Properties Is 1920x1080/60Hz or the maximum supported by your Using the On-Screen MenusVideo card, whichever is lower. You can get the best Picture at 1920x1080/60HzPD520 OSD Menu Structure Aspect ratio selection persists until you change it. It is SourceNot saved independently for each input Aspect RatioBOX Remote Aspect Ratio Control Description KeyImage Adjust Save Settings onBrightness and contrast controls are interactive. a change Achieve the optimum settingControls are interactive. a change to one may require a SettingTypical Test Pattern for Adjusting Sharpness Planar PD520 Owner’s Operating Manual Disabled When Surround is set to On, the graphic equalizer isAudio Setup On the characteristics of the incoming signalLetterbox Mode = Letterbox Image Adjust InstallerDescribed on page 37 is set to On Use it with caution Any white balance adjustments you make here areWhite Balance Gain 100 OffsetUsing Picture-In-Picture PIP Source PIP Input SourcePosition Cleaning Maintenance and TroubleshootingTroubleshooting Tips Computer Signal Serial Command Syntax RS-232 Connection and Port ConfigurationCommand Description Serial CommunicationsSAB Key 0002 0015 Key 0100 PD520 Specifications SpecificationsSpecifications are subject to change without notice 1shows the PD520 dimensions all dimensions are in inches PD520 DimensionsSignal Mode Vertical Horizontal Computer Signal CompatibilityPage 020-0705-00 Rev. a October
Related manuals
Manual 78 pages 37.73 Kb Manual 26 pages 63.41 Kb

PD520 specifications

The Planar PD370, PD420, PD470, and PD520 are a series of high-performance professional displays designed for various applications including corporate, retail, and educational environments. Each model offers unique features and characteristics that cater to different user needs, ensuring versatility and exceptional visual quality.

The Planar PD370 is a 37-inch display that excels in delivering vibrant images with its Full HD resolution of 1920x1080 pixels. Its narrow bezels allow for a sleek design, making it ideal for multi-display configurations. It supports a range of connectivity options, including HDMI, DisplayPort, and VGA, ensuring compatibility with various devices. Additionally, the PD370 features advanced color calibration technology that guarantees consistent color accuracy, making it perfect for video presentations.

Moving to the PD420, this 42-inch display enhances viewing experiences with its larger size and similar Full HD resolution. The PD420 is equipped with advanced LED backlighting, which improves brightness and contrast ratios, resulting in dazzling visuals even in well-lit spaces. It also includes built-in speakers, which is a notable feature for presentations and video playback, eliminating the need for external audio equipment. The PD420 is optimized for 24/7 operation, making it suitable for digital signage applications.

The PD470 takes productivity a step further with its 47-inch display. This model is particularly designed for collaboration, featuring touchscreen capabilities that allow for interactive presentations and teamwork. The responsive touch technology ensures smooth navigation, while the anti-glare surface minimizes reflections and provides a comfortable viewing experience. Additionally, the PD470 supports multiple input sources, allowing users to switch between devices seamlessly.

Finally, the PD520, which stands as the largest in the series with a 52-inch display, combines superior resolution with impressive multi-source input capabilities. It integrates intelligent software for enhanced content management and scheduling, particularly beneficial for retail scenarios where dynamic content is essential. The PD520 is also designed with robust durability for constant use in high-traffic environments.

Overall, the Planar PD370, PD420, PD470, and PD520 each deliver exceptional performance tailored for specific applications, boasting features such as full HD resolution, advanced connectivity options, and user-friendly interfaces. These displays are designed not just to meet professional standards but to elevate the overall viewing experience across various sectors.
Top Page Image Contents