Screen A Mode (for PC In)
Setup B Menu
1Press MENU button to display the MENU on the screen.
2Select SETUP B menu. Press 
to move to SETUP B menu. Then press OK to go into the SETUP B menu.
3Select the
•Press 
to move to the sub- menu.
•Press OK to select a
4Adjust the value
•Each of the values can be adjusted by pressing 
5Exit from the MENU.
•Press EXIT button to get out of the MENU.
6Move the Main MENU.
7Press MENU button to move the Main MENU.
Setup B Adjustments
Menu Item | Adjusts this |
|
|
|
|
SERIAL CONTROL | Select LAN ON or LAN OFF |
|
|
LAN SETTING | Configure the IP address of the set for control |
| via Ethernet |
|
|
OSD | Configures the OSD menu display |
TURN OFF | Turns off OSD after |
H POSITION | OSD H position on screen |
V POSITION | OSD V position on screen |
ROTATION (of OSD) | Rotates OSD only to landscape/portrait |
INFO DISPLAY | Select to display, or not, the information |
| OSD. The information will be displayed when |
| the input signal or source are changed and |
| give warning when the signal is out of range. |
| The displaying interval can be selected in the |
| range |
TRANSPARENCY | Set the transparency of the OSD |
|
|
OFF TIMER | Power off after 1 to 24 hours |
|
|
SETUP B RESET | Initialize previously adjusted values of this |
| menu |
|
|
FACTORY RESET | Initialize to factory defaults. All |
| configurations will be initialized. |
|
|
Indisys Management System: Setup and Operation | 24 |