Options
Options
1Press MENU button to display the MENU on the screen.
2Select OPTION menu. Press 
to move to OPTION menu. Then press OK to go into the OPTION menu.
3Select the 
to move to the
4Press MENU button to move the Main MENU.
Option Menu Adjustments
Menu Item | Adjusts This |
|
|
|
|
INPUT | Displays the current input resolution |
RESOLUTION |
|
|
|
SCAN MODE | Normal or Overscan |
| Some video formats require different scanning modes to |
| display the image best. |
|
|
CHANGE SECURITY | This password is applied to the TILING MENU LOCK MENU. |
PASSWORD | The factory preset password is 9999. |
|
|
TILING MENU | Locks the tiling menu to protect the tiling display setting. |
LOCK |
|
|
|
GROUP ID | Setup the Tiling Group, A through J. |
|
|
IR control | Prevents the display from being controlled by the remote |
| controller. To return to normal operation, press the ENT |
| button on the KEY PAD for 3 sec. |
|
|
Tiling | Expands one image over multiple screens. |
| Select ENABLE and press OK. |
| Select ON and press OK. |
| Select H Monitors and press OK, then select the |
| number of Horizontal Monitors and press OK. |
| Select V Monitors and press OK, then select number |
| of Vertical Monitors and press OK. |
| Select Monitor ID and press OK. |
| Select the ID for each monitor and press OK. |
| Select FRAME COMP and press OK. |
|
|
Power on delay | Adjust the delay time between being in “standby” mode |
| and entering “power on” mode. Range: |
|
|
Power on input | Select the default input source for power on. |
detect |
|
|
|
Indisys Management System: Setup and Operation | 25 |