JVC DT-V1700CG manual Area MARKER-R, Center Marker, Color Matrix

5. AREA MARKER-R

Items	: Selects the size marker for the other screen ratio
	(aspect) used when the screen ratio is 16:9. (for
	external control)
Settings	: OFF/4:3/16:9/14:9/13:9/MODE 1/MODE 2

Functions : OFF: The marker is not displayed. 4:3/16:9/14:9/13:9: Displays the marker (a white quadrangle) showing the screen size of each aspect ratio.

MODE 1/MODE 2: Displays no markers because these settings will be used for function expansion in the future.

●AREA MARKER-R is displayed when a 16:9 picture such as 1080i/1035i/720p etc. is displayed or the picture is switched to the 16:9 screen ratio by pressing the ASPECT button.

●The marker is actually displayed when the external control selects each setting. (No markers are displayed even if each marker is selected only in the monitor’s AREA MARKER-R setting.)

6.CENTER MARKER

Items	: Makes the center marker appear or disappear.
Settings	: ON/OFF

Functions : ON : The center marker (a white cross) is displayed on the center of the screen.

OFF : The marker disappears.

●To actually display the marker, the AREA MARKER button on the monitor needs to be pressed so that it is illuminated.

Center marker

	R-Y PHASE	90
ITU601	R/B GAIN	0.79
	G-Y PHASE	244
	G/B GAIN	0.45
	R-Y PHASE	90
ITU709	R/B GAIN	0.86
	G-Y PHASE	244
	G/B GAIN	0.30

Item	: SELECT
Function	: Selects the picture matrix standard.
Settings	: ITU601 or ITU709/ MANUAL
	ITU601 or ITU709 : Standard setting
	MANUAL	: Manual setting

NOTE :The following items are displayed when MANUAL is selected. When ITU601 or ITU709 is selected, they are not displayed.

Item		: R-Y PHASE
Function		: Sets the R-Y phase.
Settings	: 90/92/94/112
Item		: R/B GAIN
Function		: Sets the R/B gain.
Settings	: 0.86/0.56/0.68/0.79
Item		: G-Y PHASE
Function		: Sets the G-Y phase.
Settings	: 244/253/236/240
Item		: G/B GAIN
Function		: Sets the G-B gain.
Settings	: 0.30/0.34/0.40/0.45
Item		: sub menu
Function		: Performs the R-Y PHASE, R/B GAIN, G-Y
			PHASE or G/B GAIN settings in a single-line
			display. The display position depends on the

7.COLOR MATRIX

Selects or adjusts the standard of the color

demodulation (color rendering). Press the button to display the setting menu illustrated on the right.

<COLOR MATRIX>

SELECT :MANUAL R-Y PHASE :90 R/B GAIN :0.86 G-Y PHASE :244 G/B GAIN :0.30 sub menu

reset

EXIT: MENU ADJUST:-+ SELECT:

The menu screen when MANUAL is selected.

		“sub menu POSITION” setting.
Settings	: Same as R-Y PHASE, R/B GAIN, G-Y PHASE or
		G/B GAIN
Item	: reset
Function	: Sets the R-Y PHASE, R/B GAIN, G-Y PHASE
		and G/B GAIN values to factory-preset ones.

●The standard setting is set to “ITU601” or “ITU709” depending on the input signal format.

The factory preset of MANUAL is ITU709

Input Signal Format	Standard	Manual
	setting	setting
		(MANUAL)
NTSC, PAL, 480/60i,	ITU601
480/60p, 576/50i, 575/50p
		ITU709
720/60p, 1080/50i, 1080/60i,	ITU709
1035/60i, 1080/24pSF

12

Untitled-1 12 01.3.27, 9:58