APPENDIX: CONNECTION EXAMPLES FOR THE SDI INPUT CARD
This section explains the usage precautions and connection examples when using the SWITCHED OUT terminal of the SDI input card.
Usage Precautions
●The selected signal is output from the SWITCHED OUT terminal only when the monitor’s power is turned on.
●The output signal from the SWITCHED OUT terminal is the one that is selected from the signals input to SDI 1 or SDI 2.
The table below shows the connection between the INPUT SELECT buttons (input signal selection) and the input/output of the SDI input card.
Selected INPUT SELECT Buttons | Signal Output from the SWITCHED OUT Terminal |
|
|
A, C, E | Signal from SDI 1 |
|
|
B, D, F | Signal from SDI 2 |
|
|
DT-V1700CG MULTI FORMAT MONITOR
JVC PROFESSIONAL PRODUCTS COMPANY
DIVISION OF US JVC CORP.
1700 Valley Road Wayne, N.J. 07470
JVC CANADA INC.
21 Finchdene Square, Scarborough Ontario M1X 1A7
© 2001 VICTOR COMPANY OF JAPAN, LIMITED
24
Printed in Japan
24 | 01.3.27, 9:58 |