JVC XV-S400BK, XV-S402SL, XV-S300BK, XV-S302SL manual Rear panel, Video OUT jack, AC in connector

Page 13

Preliminary knowledge

Rear panel

For XV-S400BK/XV-S402SL

12

DIGITAL OUT

 

VIDEO OUT

 

PCM / STREAM

 

COMPONENT

COAXIAL

Y

PB

PR

 

 

 

OPTICAL

 

 

 

S-VIDEO

VIDEO RIGHT

LEFT

 

 

AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT

AND AND

VIDEO VIDEO

AV COMPU LINK

1

AC IN

3 4 5

6

7

8

9

1DIGITAL OUT jack (OPTICAL/COAXIAL) (18) Outputs digital audio signals. Both coaxical and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the Preference display.

2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT AND VIDEO”.

3S-VIDEO OUT jack (16) Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4VIDEO OUT jack (16)

Outputs a composite video signal.

This jack is enabled regardless of VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch position.

5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.

6VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT AND VIDEO” or “S-VIDEO AND VIDEO”.

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting will not be effective.

7AV COMPU LINK jacks (52)

Connects with other JVC equipment supporting the AV Compulink function to facilitate integrated operations.

8 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

9Region Code label (15) Shows Region Code number.

Preliminary

knowledge

 

 

For XV-S300BK/XV-S302SL

1 2

DIGITAL OUT

 

 

VIDEO OUT

 

 

 

PCM / STREAM

 

COMPONENT

 

 

 

 

Y

 

PB

PR

COAXIAL

S-VIDEO VIDEO RIGHT LEFT

AUDIO OUT

VIDEO OUT SELECT

S-VIDEO COMPONENT AND

VIDEO

1

AC IN

3 4

5

6

7

8

1DIGITAL OUT jack (COAXIAL) (18)

Outputs digital audio signals. You must select the type correctly according to the external device connected to via the Preference display.

2COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.

To enable these jacks, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “COMPONENT”.

3S-VIDEO OUT jack (16) Outputs a S-video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

4VIDEO OUT jack (16)

Outputs a composite video signal.

To enable this jack, select VIDEO OUT SELECT (COMPONENT/S-VIDEO) switch to “S-VIDEO AND VIDEO”.

5AUDIO OUT jacks (LEFT/RIGHT) (16, 17) Outputs stereo analog audio signals.

6VIDEO OUT SELECT switch (COMPONENT/S-VIDEO) (16) Select “COMPONENT or “S-VIDEO AND VIDEO”.

Note that you must change the switch position while the unit is stopped, or the unit power is off. Otherwise, the changed setting will not be effective.

7 AC IN connector (19)

Connects to the wall outlet using the suppplied AC power cord.

8Region Code label (15) Shows Region Code number.

11

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RU96%.966 RU96%.966/2QO\ RU96%.966Mises en garde, précautions et indications diverses Table of Contents Supplied accessories FeaturesIntroduction To stop/quit random playback in the middle To playback in random order RandomImportant cautions Safety precautionsNames of parts and controls Preliminary knowledgeFront panel For XV-S400BK/XV-S402SLRemote control unit Choice button # Infrared signal-emitting windowPrevious button 24, 25, 27 Clear button 24, 32, 4210 0 +10 Numeric buttons Infrared signal-emitting window= 3D Phonic button $ Menu buttonPROGRAM/RANDOM indicators Disc indicatorDisplay window Multi-information windowAC in connector Video OUT jack 16 Outputs a S-video signalRear panel Video OUT jackOn-screen displays Operational PrinciplesOpening displays Preference displaysTo prevent the monitor from burning out Screen Saver Play mode displaysStatus displays During Audio CD/MP3 CD During Video CD/SVCD PlaybackOn-screen guide icons How to use numeric buttonsAbout invalid operation icon To select a track/title numberPlayable disc types About discsDisc structure Playable discsConnections Getting startedBefore making any connections To connect to a TVTo connect to a TV with the component video input jacks Setting is not effectiveEnabling the Component Video OUT Blue Green Red Component video cable Not supplied UnitTo connect to audio equipment with a digital input To connect to an audio amplifier or receiverAudio cable To connect the power cord Precautions for the safe use of batteries To install batteries in the remote control unitPrecautions You can operate your TV from the remote control unit Setting the remote control signal for operating your TVSet TV-DVD switch to TV position Manufacturer code listTurns the TV on or off Switches the TV input mode between TV and VideoSelects the TV channels directly Channel numberTurning on/off the unit Basic operationsInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo locate the beginning of the scene or song Resuming playbackTo memorize the interrupted position To resume playbackPlaying from a specific position on a disc Advanced operationsTo locate a desired scene from the DVD menu Press TOP Menu or MenuUse the numeric buttons to specify the number To locate a desired selection using 4 or ¢For DVD Video During playback Use Cursor 2/3 to move To Chap SEARCH, then press Enter Press Play ModePress Enter Use the numeric buttons 0 to 9 to enter the time To locate a desired scene from the display DigestPress Digest To display continuous still pictures Strobe Special picture playbackUse Cursor 5/∞/2/3 to select the desired scene Press and hold 8 for more than 1 secondTo zoom a scene Zoom To playback in slow-motion SlowPress 8, then use 1 / ¡ Press ZoomTo playback in the desired order Program Changing the playback orderPress 3 to start program play To playback in random order Random Repeat playbackTo repeat the current selection or all tracks Repeat Use Cursor 2/3 to move to RandomTo repeat a desired part A-B Repeat Make sure that the Repeat mode is off. If anyAudio CD/Video CD/SVCD For Audio CD For Video CD/SVCD To quit repeat playbackTo select a scene angle from the normal screen Angle Selecting a scene anglePress Angle Use Angle or Cursor 2/3 to select the desired angleTo select a scene angle from the angle list display Angle Changing the language and soundUse Cursor 5/∞/2/3 to select the desired angle Press Enter Press SubtitlePress Audio To change the audio language or sound AudioUse Audio or Cursor 2/3 to select the desired audio Enjoying virtual surround sound Selecting the picture characterTo select the picture character To simulate surround sound 3D PhonicTo check the disc/time information Checking the statusTo turn off the disc/time display Press Display To check the DVD function status To dim the brightness of the display windowDimning brightness of the display window Press DisplayMP3 CD playback Basic operations using the basic control buttonsAbout MP3 CD disc Unavailable functionsHow to select a Track or Group Track/Group selection using the numeric buttonsAdvanced functions Program playbackYou can playback Groups on an MP3 CD disc in random order Random playbackWindow on the front panel. After playing all groups Disc, random playback endsRepeat playback To turn off the play mode menu display Press Play ModeDisc/time information You can repeat playback of the current Group or all GroupsHow to set preferences Initial settingsSelecting preferences LanguageAudio Display System To set Parental Lock for the first time Limiting playback by childrenWhile points Country Code, use Press Enter while holding down 7 on the remote control unit To change the settings Parental LockScreen display appears On the TV screenWhen selecting no Moves to Password fieldWhen you enter the wrong password more than 3 times Press OPEN/CLOSEConnection and setup AV Compu Link remote control systemAdditional information Operation When you connect the component video output to your TVMaintenance of discs How to handle discsCare and handling of discs Label sideSymptom Possible case Remedy TroubleshootingSpecifications Appendix ATable of languages and their abbreviations Appendix BCountry/Area code list for parental lock Toll Free 1 800 Do not service the television yourselfFor customer use Limited WarrantyJVC 0702MZMCREJSC
Related manuals
Manual 54 pages 36.49 Kb
Top Page Image Contents