Initial settings
To change the settings [PARENTAL LOCK]
You can change the Parental lock settings later.
4 To change the set level, use CURSOR 2/3 to
select the desired level while points [Set Level], and then press ENTER.
moves to [PASSWORD].
1
|
|
|
| TV | DVD |
| OPEN/ |
| STANDBY/ON | ||
| CLOSE |
| TV | DVD | |
|
| TV1 |
| TV2 | TV3 |
|
| 1 |
| 2 | 3 |
|
| TV4 |
| TV5 | TV6 |
|
| 4 |
| 5 | 6 |
|
| TV7 |
| TV8 | TV9 |
|
| 7 |
| 8 | 9 |
|
| TV |
| TV0 | MUTING |
|
| 10 |
| 0 | +10 |
| RETURN |
|
| TV/VIDEO | |
|
|
| CANCEL | ||
|
| U |
|
| M |
|
| EN | CH |
| |
|
| M |
| EN | |
| P |
| + |
| U |
T | O |
|
|
|
|
VOL- |
|
| VOL+ |
ENTER
C | CH |
| AY |
H |
| ||
OI | - |
| PL |
CE |
|
| DIS |
PREVIOUS |
| NEXT | |
CLEAR | SELECT | STROBE | |
SLOW- |
| SLOW+ | |
PLAY |
|
| THEATER |
MODE SUB TITLE | AUDIO | POSITION | |
DIGEST | ANGLE |
| ZOOM |
3D |
| ||
PHONIC |
|
1,
5 Enter the password using the numeric buttons (0 to 9) and press ENTER.
moves to [EXIT].
The password entered in the above step becomes the new password. If you do not change the password, enter the same password as in the step 2. Even if you want to change only the country/area code and/or set level, do not forget to enter the password after changing the country/area code and/or set level. Otherwise, the new country code and/or set level will not become effective. Pressing ENTER again returns to the opening display.
REMOTE CONTROL
7 While a DVD VIDEO disc is stopped or no disc is inserted
1 Press ENTER while holding down 7 on the remote control unit.
The Parental Lock on-
screen display appears |
|
|
| PARENTAL LOCK | |
|
|
|
|
| |
Country Code |
| US | |||
on the TV screen. |
|
|
|
|
|
Set Level |
| 8 | |||
|
|
|
|
| |
| PASSWORD |
| - - - - |
points [PASSWORD].
EXIT
CURRENT PASSWORD? ••• PRESS 0~9 KEY
2 Enter your current
numeric buttons (0 to 9) and press ENTER.
moves to [Country Code] if you enter the correct password.
If you enter the wrong password, “WRONG! RETRY...” appears on the TV screen, and you cannot go to next step.
settings | 2/3 to select the desired country code and | |
Initial | 3 To change the country code, use CURSOR | |
press ENTER. | ||
| ||
| moves to [Set Level]. | |
|
When you change the country code, you must select the parental level.
NOTES
•When you enter the wrong password more than 3 times
in step 2 above, moves to [EXIT] automatically and CURSOR 5/∞ does not work.
•If you forget your password in step 2 Enter “8888.”
50