JVC XV-S300BK manual To connect to an audio amplifier or receiver, Audio cable

Getting started

To connect to an audio amplifier or receiver

You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver.

The unit

DIGITAL OUT	VIDEO OUT
PCM / STREAM	COMPONENT				AV COMPU LINK
COAXIAL	Y	PB	PR
				VIDEO OUT SELECT
OPTICAL				S-VIDEO	COMPONENT
				AND	AND
				VIDEO	VIDEO
S-VIDEO	VIDEO	RIGHT	LEFT

: For XV-S400BK/XV-S402SL

Red White

White

Red

Audio cable (not supplied)

Amplifier or receiver

IN

LEFT

AUDIO

RIGHT

Getting started

•Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.

To connect to audio equipment with a digital input

You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL* or COAXIAL) to the digital input of a receiver, CD Recorder, etc. by using an optional digital cable. The digital audio signal from a disc is directly transferred. If you connect the unit to a Dolby Digital or DTS decoder or an amplifier with a built-in decoder by using an optional digital cable, you can enjoy high-quality surround sound.

When you make the digital connection, we also recommend to make the analog connection, because, depending on discs, no signal may be output from the DIGITAL OUT.

* : The OPTICAL jack is equipped for XV-S400BK/XV-S402SL only.

The unit

DIGITAL OUT		VIDEO OUT
PCM / STREAM		COMPONENT			AV COMPU LINK
COAXIAL	Y	PB	PR
				VIDEO OUT SELECT
OPTICAL				S-VIDEO	COMPONENT
				AND	AND
				VIDEO	VIDEO
-VIDEO	VIDEO

Red	White	: For XV-S400BK/XV-S402SL	Optical digital cable
			(not supplied)
		Coaxial digital cable
		(not supplied)	Digital equipment
			White	IN	IN
					OPTICAL
				LEFT
				AUDIO	DIGITAL
	Audio cable			RIGHT	COAXIAL
			Red
	(not supplied)

The OPTICAL jack is protected by the cover.

To connect the optical cable to the jack, pull out the cover and then connect the plug to the jack inside in the correct direction (For XV-S400BK/XV-S402SL only).

NOTES

•When you connect the unit's DIGITAL OUT to digital audio equipment, before using, make the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display correctly according to the connected audio equipment. If the “DIGITAL AUDIO OUTPUT” is not set correctly, loud noise may be generated from speakers, causing damage to your speakers. See “DIGITAL AUDIO OUTPUT” on page 46.

•With the digital connection, the COMPRESSION settings in the AUDIO page of the preference display are invalid. Settings for these items must be made from the decoder.

18