JVC XV-M512SL manual Resuming playback, To memorize the interrupted position, To resume playback

Basic operations

Resuming playback

The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later.

To memorize the interrupted position

1 Set the “RESUME” setting on the “SYSTEM” page of the preference display to “ON”.

(See page 56 for details about how to set.)

2 At the position you want to interrupt playback, press 7, or press DVD STANDBY/ON on the remote

control or on the front panel.

The unit memorizes the interrupted position.

Basic operations

•If you interrupt playback by pressing 7 in step 2 above and then turn off the power, the memory is not cleared.

To resume playback

7While the disc you interrupt playback last time is still in the disc tray.

Press 3.

The unit starts playback from the position where you interrupted playback last time.

•To clear the resume position memory Carry out one of the followings. *Take out the disc from the tray.

*Press any one of the DISC (1 through 3) buttons on the front panel. *Press 7 while stopped.

*Turn on the unit by pressing DVD STANDBY/ON (on the remote control) or (on the front panel).

NOTES

•The resume function does not work with Audio CD and MP3 discs.

•The resume function does not work if “RESUME” on the “SYSTEM” page of the preference display is set to “OFF”.

•In the case of a Video CD/SVCD disc with PBC function, the unit may resume playback from a point slightly earlier than the resume point you stored.

•The resume function does not work in the program or random mode.

26