JVC XV-M512SL manual Karaoke operation, Preparation, Turning on the Karaoke function

KARAOKE operation

Preparation

Turning on the KARAOKE function

							TV	DVD
1	SHIFT	DISC			STANDBY/ON
		SELECT			TV		DVD
	PLAY		3D		TV/VIDEO
	MODE	PHONIC			CANCEL		RETURN
	TV1		TV2				TV3
	1			2			3
	TV4		TV5				TV6
	4			5			6
	TV7		TV8				TV9
	7			8			9
	TV -/--		TV0				MUTING
	10			0			+10
							THEATER
	ANGLE	SUBTITLE			AUDIO		POSITION
	DIGEST						ZOOM
	PREVIOUS						NEXT
	4					¢
	CLEAR		SELECT			STROBE
	7			3			8
	SLOW					SLOW+
		–
	1					¡
	KA		KEY C		NTROL+		RESERVEM
	OKE			O
	RA						ENU
	TITLE		CH+
	VOL			5			VOL

-+

5 ENTER 5

∞

C	HOICE	CH-	DIS
		KEY CONTROL–
			PLAY

RM-SXVM52U REMOTE CONTROL

1 Press TITLE-KARAOKE while holding down SHIFT to turn on the KARAOKE function.

Each time you perform the operation above, the KARAOKE function turns on or off.

When “on”, “KARAOKE” appears in the display on the front panel.

(Display window)

DISC KEY KARAOKE

KARAOKE fanction indicator

KARAOKE	operation	NOTES
		• When playing back a MP3 disc or a DVD VIDEO recorded
		with linear PCM audio, you cannot turn on the
		KARAOKE function.
		• When the KARAOKE function is active, you can specify
		a title in a DVD VIDEO disc using the numeric buttons
		even during playback. Because most DVD VIDEO discs
		assign a title to each song, you can easily select the
		desired song using the numeric buttons.
		(When the KARAOKE function is inactive, using the
		numeric button selects a DVD VIDEO chapter during
		playback.)
		• During program or random playback, you cannot turn
		on the KARAOKE function.

Connecting microphones

		MIC 1	MIC 2	DISC3	0	DISC 3	3
STANDBY
				DISC2	0	DISC 2	2
STANDBY/ON	MIN	MAX	MIN	MAX
		MIC 1	MIC 2	DISC1	0	DISC 1	1
								PLAY & EXCHANGE

XV-M512 DVD/SUPER VCD/VCD/CD PLAYER
DISC TITLE CHAP	RESUME THEATER	4 SKIP ¢	STOP	PLAY	PAUSE
	DVD
DOLBY	EACH		7	3	8
D I G I T A L
1

1 Connect microphone(s) to the MIC 1/2 jack(s) on the front panel.

NOTES

•While an Audio CD disc is selected (not only during playback but also while stopped), the input signals from the MIC 1/2 jacks are not output from the DIGITAL OUT jack.

•When a DVD VIDEO disc is selected, you can enjoy the input signals from the MIC 1/2 jacks with the DIGITAL OUT jack (except recorded with linear PCM audio). In such case, set the “DIGITAL AUDIO OUTPUT” setting in the “AUDIO” page of the preference display to “PCM ONLY” (see page 54).

•To adjust the microphone volume, use MIC 1/2 LEVEL.

Turning it clockwise raises the level, while turing it counter-clockwise lowers the levels.

46