JVC XV-M512SL manual Display, Off

Page 57

Initial settings

NOTES

• The unit does not provide the DTS decoding function.

• When playing a DVD VIDEO or Audio CD disc with DTS,

use a DTS decoder to get correct signals from your

speakers. Never use the unit's analog output jacks,

which output incorrect signals that may damage your

speakers.

• If you connect the analog outputs and digital outputs

simultaneously, be sure to select the source of the

COMPRESSION

You can compress the dynamic range of the sound if needed. Using this function, you can listen to sound at low volumes easily.

English

LANGUAGE

AUDIO

DISPLAY

SYSTEM

DIGITAL AUDIO OUTPUT

STREAM / PCM

DOWN MIX

 

Lo / Ro

COMPRESSION

 

ON

 

 

 

EXIT

PRESS

KEY

 

 

amplifier correctly, or set the level control of the

amplifier connected to the analog outputs to minimum.

• While an Audio CD disc is selected (not only during

playback but also while stopped), the input signals from

the MIC 1/2 jacks are not output from the DIGITAL OUT

jack.

• When the KARAOKE function is active and the DVD

VIDEO disc is selected, you can enjoy the input signals

from the MIC 1/2 jacks with the DIGITAL OUT jack

(except recorded with linear PCM audio). In such case,

set the “DIGITAL AUDIO OUTPUT” to “PCM ONLY”.

DOWN MIX

 

 

 

 

To playback a DVD VIDEO

 

 

 

 

 

 

 

 

disc recorded with surround

LANGUAGE AUDIO

DISPLAY SYSTEM

 

 

 

 

 

 

DIGITAL AUDIO OUTPUT

 

STREAM / PCM

 

•ON

Audio is played back with the dynamic range compressed.

•OFF

Audio is played back as it was recorded.

NOTES

•The Compression function works only when playing back a disc recorded with DOLBY DIGITAL 1CH or 2CH. The setting is not effective for other discs.

•The Compression function does not work when the 3D PHONIC function is activated.

multichannel audio

DOWN MIX

 

Lo / Ro

 

 

 

 

 

 

 

correctly, the DOWN MIX

COMPRESSION

 

ON

 

 

 

 

 

 

 

setting must be properly

 

 

 

 

 

 

 

 

 

EXIT

 

 

 

 

 

 

 

 

made according to your

 

PRESS KEY

 

 

 

 

 

 

 

 

 

 

audio system. Note that this

 

 

 

 

 

 

 

 

 

 

 

 

setting affects the analog audio output signal from the AUDIO OUT jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.

• Lt/Rt

When you enjoy surround audio by connecting the

DISPLAY page

MONITOR TYPE

You can select the monitor type to match your TV when you playback DVD VIDEO discs recorded for wide screen televisions.

LANGUAGE

AUDIO

DISPLAY

SYSTEM

MONITOR TYPE

4:3 LB

SCREEN SAVER

MODE 2

ON SCREEN GUIDE

 

ON

 

 

 

EXIT

PRESS

KEY

 

 

unit’s AUDIO output to a surround decoder or an

internal amplifier.

• L0/R0

When you enjoy conventional 2-channel stereo audio

by connecting the unit’s AUDIO output to a stereo

amplifier/receiver or television set, or when you

duplicate audio of a DVD VIDEO disc recorded with

surround audio to your MD, cassette, etc.

NOTES

•The Down mix function does not work when the 3D PHONIC function is activated.

•The DOWN MIX setting does not affect an MPEG or Dolby Digital bitstream signal from DIGITAL OUT.

To enjoy the DOWN MIX effect from DIGITAL OUT when playing back a disc recorded with the MPEG multichannel or Dolby Digital format, set “DIGITAL AUDIO OUTPUT” to “PCM ONLY” (see page 54).

•When playing back a disc recorded with DTS, you cannot get the DOWN MIX effect from both DIGITAL and ANALOG outputs.

• 4:3 LB (Letter Box Conversion)

Should be selected when you connect a normal TV to the unit.

When you play a wide picture recorded on a DVD VIDEO disc, the picture is displayed with bands across the upper and lower portions of the screen.

• 4:3 PS

(Pan Scan Conversion)

settings

Should be selected when

 

 

 

you connect a normal TV to

 

 

the unit. When you play a

 

Initial

wide picture recorded on a

 

 

 

DVD VIDEO disc, a portion of

 

the picture is automatically

 

 

cut off from the left and right

 

sides of the image.

 

 

Depending on the disc, it may not be possible to

 

playback in this mode. In that case, the picture is

 

played back as in 4:3 LB

mode.

 

55

Page 56 Page 58
Image 57
Page 56 Page 58
Contents XV-M512SL Important for Laser Products Table of Contents Limiting playback by children Selecting preferencesSupplied accessories FeaturesIntroduction IntroductionAdditional supplemental remarks Number indicates the procedural stepImportant cautions Safety precautionsNames of parts and controls Preliminary knowledgeFront panel STANDBY/ONDisplay window Play Mode button 29, 33, 34, 35, 43 Play Mode buttonDisc Select button Shift buttonPrevious button 25, 28 @ Infrared signal-emitting windowClear button 24, 33, 42 SLOW- button 25, 32Attenuator ON/OFF switch Otherwise, the changed setting will not be effectiveAttenuates the audio output level when it is set to on Rear panelOn-screen displays Operational PrinciplesOpening displays Preference displaysPlay mode displays Karaoke setting displaysStatus displays To prevent the monitor from burning out Screen Saver On-screen guide iconsAbout invalid operation icon To select a track/title number How to use numeric buttonsTo enter a time or chapter number To select a number between 1Playable disc types About discsDisc structure Playable discsConnections Getting startedBefore making any connections To connect to a TVTo connect to a TV with the component video input jacks How to make the Component Video OUT jacks activeGetting Connect Y to Y, PB to PB, PR to PR correctlyTo connect to audio equipment with a digital input To connect to an audio amplifier or receiverTo connect the power cord To install batteries in the remote control unit Using the remote control unitPrecautions for the safe use of batteries PrecautionSetting the remote control signal for operating your TV To use the remote control unit for TV operationYou can operate your TV from the remote control unit Manufacturer code listStarted Turning on/off the unit Basic operationsInserting and removing discs Place the disc in the trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo advance or reverse playback rapidly while monitoring From the Remote control unitTo locate the beginning of the scene or song From the Front panelResuming playback See page 56 for details about how to setTo memorize the interrupted position To resume playbackAdvanced operations To locate a desired scene from the DVD menuPress Title or Menu Use the numeric buttons to specify the number To locate a desired selection using 4 or ¢You can play a desired title or chapter DVD Video or Track Audio CD/Video CD/SVCD by specifyingPress Enter Press Play ModeAppears under MenuTo locate a desired scene from the display Digest Use the numeric buttons 0 to 9 to enter the timePress Digest Use Cursor 5/∞/2/3 to select the desired scene Special picture playbackPress and hold 8 for more than 1 second Advanced OperationsTo playback in slow-motion Slow To cancel strobe playPress 8, then use 1/¡ Press ZoomChanging the playback order To playback in the desired order ProgramPress 3 to start program play Repeat playback To playback in random order RandomUse Cursor 2/3 to move to Random Repeat mode is selected, you cannot move to Make sure that the Repeat mode is off. If anyTo repeat a desired part A-B Repeat To quit repeat playbackPress Angle To select a scene angle from the normal screen AngleUse Angle or Cursor 2/3 to select the desired angle To quit A-B repeat playbackChanging the language and sound To select a scene angle from the angle list display AngleTo select the subtitle language Subtitle Use Audio or Cursor 2/3 to select the desired audio To change the audio language or sound AudioPress Audio For SvcdEnjoying virtual surround sound Selecting the picture characterTo select the picture character To simulate surround sound 3D PhonicTo check the disc/time information Checking the statusTheater To turn off the disc/time display Press DisplayTo check the DVD function status To dim, the brightness of the display windowDimming the brightness of the display window Press DisplayMP3 disc playback Basic operations using the basic control buttonsAbout MP3 disc Unavailable functionsHow to select a Track or Group Track/Group selection using the numeric buttonsAdvanced functions Program playbackRandom playback Repeat steps 3You can playback Groups on an MP3 disc in random order Disc/time information Repeat playbackUse Cursor 2/3 to move to REPEAT, then press Enter You can repeat playback of the current Group or all GroupsKaraoke operation Connecting microphonesPreparation Turning on the Karaoke functionReserving songs To playback songs reservedPress MENU-RESERVE while holding down Selecting audio tracks Audio Selecting audioSelecting Karaoke sound Use Cursor 2/3 to move to AudioUse Cursor 5/∞to select the desired sound to be played back Use Cursor 2/3 to move to Karaoke SoundUse Cursor 2/3 to move to Vocal Normal Mask ReplaceOperation Use Cursor 5/∞ to select ReplaceAdding an echo effect Echo Adding an effect to your voice To shift the musical key Shifting the musical key From normal screen From on-screen displayHow to set preferences Initial settingsSelecting preferences LanguagePCM only AudioSTREAM/PCM Dolby DIGITAL/PCMOFF DisplaySystem To set Parental Lock for the first time Limiting playback by childrenTo change the settings Parental Lock Press Enter while holding down 7 on the remote control unitTo change the country code, use Cursor Moves to Password field When selecting no Enter your 4-digit password using the numeric buttons 0 toUse the Cursor 5/∞ to move to YES, then press Enter Press 0Open/CloseConnection and setup AV Compu Link remote control systemAdditional information Additional InformationOperation Turn on the main power of the televisionMaintenance of discs How to handle discsCare and handling of discs Label sideSymptom Possible case Remedy TroubleshootingAppendix ATable of languages and their abbreviations SpecificationsAppendix BCountry code list for parental lock Victor Company of JAPAN, Limited
Top Page Image Contents