JVC Model HR-XVC1UJ manual Setting the Video Channel / Setting the language, Enter

Press POWER to turn on the DVD/VCR.

Setting the Video Channel / Setting the language

Setting the Video Channel

To view playback of a recorded tape, or to watch a program selected by the VCR's channel selector, the TV must be set to channel 3 or 4 (video channel).

TV VCR DVD POWER

DVD MENU	MARKER	RETURN	OPEN/
			CLOSE
DISPLAY	A.TRK	C.RESET	ZERO RETURN
	SUB TITLE	ANGLE	SEARCH
			MODE
SP/EP
PLAY	ZOOM	TITLE	REPEAT
MODE			A-B

		TV
		POWER
		INPUT
		TV VOL
0	TIMER TV/VCR
REW	PLAY	FF
REC	STOP	PAUSE

When a TV is connected with the 75 ohm coaxial cable only.

1

2 Slide TV/VCR/DVD switch to VCR/DVD. Then press VCR to select the VCR mode. The VCR indicator on the front panel will light.

3 Set the 3/4 Channel selector switch on the rear panel to CH 3 or 4.

4 Turn ON the TV and set to CH 3 or 4 to correspond with the channel selected in step 3.

5 Press TV/VCR to select the VCR position. The VCR indicator will appear in the display.

6 Select any channel to receive a TV station in your area. The channel number will appear on the screen for about 4 seconds.

For a push-button TV tuner

If CH 3 or 4 corresponding to the video channel cannot be tuned on your TV, proceed as follows: set the VCR 3/4 channel selector and the TV to CH 3 or 4, play back a prerecorded tape and tune the TV to receive a sharp color picture from the video cassette recorder. Refer to your TV owner's manual for details.

Setting the language

You can choose from three different languages (English, French and Spanish) for the on-screen displays.

			/VCR	CH
SKIP		TV			+	SKIP
/INDEX						/INDEX
SET			ENTER/			SET
			SELECT
SET UP						CANCEL
MENU
		T			—
				H
			V/VCR C
OSD				SLOW		SKIP
	A.	MONITOR				SEARCH

NOTES:

• If the unit does not operate properly,

or No key operation (by the unit and/

or the remote control): Static electric-

ity, etc., may affect the player's opera-

1 Press SETUP MENU,

If you use the unit for the first time and press SETUP MENU, instead of the main menu screen on the right the SYSTEM SET UP menu screen in step 2 may appear.

2 Press or to select the “LANGUAGE” option, then press

ENTER.

	MENU
	TIMER REC SET	ON	OFF
	AUTO REPEAT
	SAP	ON	OFF
	CH SET UP
	SYSTEM SET UP
·+/-/ENTER/MENUÒ

SYSTEM SET UP

CLOCK SET

LANGUAGE/IDIOMA/LANGUE

NO NOISE BACKGROUND

ON OFF

AUTO CLOCK ON OFF STANDARD TIME

DAYLIGHT SAVING TIME

〈+/-/ENTER/MENU〉

tion. Disconnect the AC power cord

once, then connect it again.

•If no buttons are pressed for more than

60 seconds,the MENU screen will

return to normal TV operation

automatically.

•Both the VCR and the DVD have their

own menu options (See page 36).

3 Press or to select the desired language: English (ENGLISH), Spanish (ESPAÑOL) or French (FRANCAIS), then press ENTER.

4 Press SETUP MENU until the MENU screen is cleared.

18