JVC S200BK manual Troubleshooting, Symptom Possible case Remedy

Page 49

Additional information

Troubleshooting

What appears to be a malfunction may not always be serious. Please go through the following list before requesting service.

Symptom

Possible case

Remedy

 

 

 

Power does not come on.

Power plug is not inserted securely.

Plug in securely.

 

 

 

 

Too far from the unit.

More closer to the unit.

 

 

 

 

The tip of the remote unit is not pointed in

Point the infrared light- emitting window

Remote control does not work.

the right direction.

toward the remote sensor on the front panel.

 

 

Batteries are exhausted.

Replace the batteries with new ones.

 

 

 

 

 

Battery polarity is incorrect.

Take out the batteries and insert them again in

 

the correct direction.

 

 

 

 

 

 

Connection of video cable is incorrect.

Connect the cable correctly.

No picture is displayed on the

 

 

Input selection of TV is incorrect.

Select correctly.

monitor.

 

 

 

Disc is not playable.

Use a playable disc. (See page 12.)

 

 

 

No picture is displayed in the monitor

 

 

or the monitor screen is blue when

Jack(s) at use is (are) not active.

Make them active. (See page 13 and 14.)

using the COMPONENT or S-VIDEO

 

 

output jack(s).

 

 

 

 

 

Picture is noisy.

The unit is connected to a VCR directly

Connect the unit so that the picture signal

and the copyguard function is activated.

flows directly to the TV.

 

 

 

 

No audio is reproduced.

Connection is incorrect.

Check the connections.

 

 

Input selection of amplifier is incorrect.

Select correctly.

 

 

 

 

No audio is reproduced when playing

The audio signal is not derived from the

Use the AUDIO OUT when playing back such

back a DVD disc recorded with 96 kHz,

unit's DIGITAL OUT.

discs.

linear PCM audio.

 

 

 

 

 

Sound is distorted or noise is

Disc is dirty.

Wipe the disc surface.

generated.

 

 

 

 

 

Picture does not fit the television

MONITOR TYPE is not correctly set.

Select monitor type correctly. (See page 41.)

 

 

screen.

Television is not correctly set.

Set the television correctly.

 

 

 

 

 

Microcomputer malfunction due to

Turn off the power and unplug the power

 

lightning or static electricity.

cord, then connect the power cord again.

Operation is not possible.

 

 

Moisture condensation caused by a

Turn off the power, then turn it on a few hours

 

 

sudden change of temperature or

 

later.

 

humidity.

 

 

 

 

 

Additional

information

47

Page 48 Page 50
Image 49
Page 48 Page 50
Contents 96% Mises en garde, précautions et indications diverses Table of Contents Supplied accessories FeaturesIntroduction Number indicates the procedural step Other convenient procedures, etcTo stop/quit random playback in the middle Important cautions Safety precautionsNames of parts and controls Preliminary knowledgeFront panel Remote control unit $ Cancel button 26 Infrared signal-emitting windowNumeric buttons Angle button 29Rear panel Display windowOn-screen displays Operational PrinciplesOpening displays Preference displaysTo prevent the monitor from burning out Screen Saver Play mode displaysStatus displays During Audio CD/MP3 CD During Video CD/SVCD PlaybackOn-screen guide icons How to use numeric buttonsAbout invalid operation icon To select a track/title numberPlayable disc types About discsDisc structure Playable discsConnections Getting startedBefore making any connections To connect to a TVEnabling the Component Video OUT To connect to a TV with the component video input jacksBlue Green Red Component video cable Not supplied Red White Audio cable not supplied Blue Green RedTo connect to audio equipment with a digital input To connect to an audio amplifier or receiverRed White Audio cable not supplied Amplifier or receiver To connect the power cord To install batteries in the remote control unitPrecautions for the safe use of batteries PrecautionsTurning on/off the unit Basic operationsInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayTo start playback Basic playbackTo stop playback completely To stop playback temporarilyTo locate the beginning of the scene or song Resuming playbackTo memorize the interrupted position To resume playbackPlaying from a specific position on a disc Advanced operationsTo locate a desired scene from the DVD menu Press Title or MenuUse the numeric buttons to specify the number To locate a desired selection using 4 or ¢For DVD Video During playback SEARCH, then press Enter Press Play ModePress Enter Use Cursor 2/3 to move to Time SEARCH, then press EnterUse the numeric buttons 0 to 9 to enter the time To locate a desired scene from the display DigestPress Digest Use Cursor 5/∞/2/3 to select the desired scene Special picture playbackPress and hold 8 for more than 1 second To zoom a scene Zoom To playback in slow-motion SlowPress 8, then use 1 / ¡ Press ZoomTo playback in the desired order Program Changing the playback orderPress 3 to start program play To playback in random order Random Repeat playbackTo repeat the current selection or all tracks Repeat Use Cursor 2/3 to move to RandomAudio CD/Video CD/SVCD For Audio CD For Video CD/SVCD To repeat a desired part A-B RepeatTo quit repeat playback Unit locates a and starts repeat playback between a and BPress Angle To select a scene angle from the normal screen AngleUse Angle or Cursor 2/3 to select the desired angle To quit A-B repeat playbackList display Angle Changing the language and soundTo select the subtitle language Subtitle Press Audio To change the audio language or sound AudioUse Audio or Cursor 2/3 to select the desired audio For DVD Video For Video CDEnjoying virtual surround sound Selecting the picture characterTo select the picture character To simulate surround sound 3D PhonicTo check the disc/time information Checking the statusTo turn off the disc/time display Press Display To check the DVD function status To dim the brightness of the display windowDimning brightness of the display window Press DisplayMP3 CD playback Basic operations using the basic control buttonsAbout MP3 CD disc Unavailable functionsHow to select a Track or Group Track/Group selection using the numeric buttonsAdvanced functions Program playbackYou can playback Groups on an MP3 CD disc in random order Random playbackWindow on the front panel. After playing all groups Disc, random playback endsDisc/time information Repeat playbackUse Cursor 2/3 to move to REPEAT, then press Enter You can repeat playback of the current Group or all GroupsHow to set preferences Initial settingsSelecting preferences LanguageAudio Display System To set Parental Lock for the first time Limiting playback by childrenWhile points Country Code, use Press Enter while holding down 7 on the remote control unit To change the settings Parental LockScreen display appears On the TV screenUse the Cursor 5/∞ to move to YES, then press Enter Enter your 4-digit password using the numeric buttons 0 toCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingSpecifications Appendix ATable of languages and their abbreviations Appendix BCountry/Area code list for parental lock Toll Free 1 800 Do not service the television yourselfFor customer use Limited WarrantyJVC 0702MZMCREJSC
Top Page Image Contents