JVC S200BK manual Checking the status, To check the disc/time information

Page 35

THEATER

You can enjoy sound effects like in a major theater in Hollywood.

￿When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear.

NOTES

The 3D Phonic display will automatically disappear if you do not change the 3D PHONIC for 5 seconds.

To turn off the 3D PHONIC display manually, press

ENTER.

With a Video CD disc, if the Audio setting is set to L or R, you cannot activate the 3D PHONIC function (i.e the 3D PHONIC mode is fixed to OFF).

Conversly, when the 3D PHONIC function is active, changing the AUDIO setting to L or R from STEREO cancels the 3D PHONIC function.

The 3D PHONIC function works correctly when playing back discs recorded in the Dolby Surround or Dolby Digital 5.1-CH format.

It also works when playing back discs other than those above, but does not provide the correct effect.

The 3D PHONIC function does not affect the DTS or Dolby Digital bitstream signal from the DIGITAL OUT jack.

The sound effect will not be set or operate, even if 3D PHONIC is pressed, for the sound of DVD VIDEO discs recorded in Linear PCM.

When you set the 3D PHONIC function to on, the DOWN MIX and COMPRESSION settings in the AUDIO page of the preference display are disabled.

Advanced operations

Checking the status

You can view the disc/time information, as well as the DVD functions status on the TV screen.

To check the disc/time information

OPEN

STANDBY/ON

/CLOSE

 

PLAY

3D

MODE

PHONIC CANCEL RETURN

1

2

3

 

4

5

6

 

7

8

9

 

10

0

+10

 

 

 

THEATER

 

ANGLE

SUBTITLE AUDIO POSITION

 

DIGEST

 

ZOOM

 

US

NEXT

 

PREVIO

 

 

4

¢

 

CLEAR

SELECT

STROBE

 

3

 

7

8

 

 

 

SLOW

SLOW+

 

 

 

 

1

¡

 

TITLE

 

MENU

 

 

5

 

 

5

ENTER

5

1

 

 

CHOICE

 

DISPLAY

RM-SXVS40A REMOTE CONTROL

7 During playback

1 Press DISPLAY once for a Audio CD, Video CD or SVCD disc, or twice for a DVD VIDEO disc.

The disc/time display appears on the TV screen.

(for DVD VIDEO)

Advanced

operations

 

 

 

 

 

 

 

 

 

 

 

 

 

TITLE 1CHAP. 25 TIME 2:25:25 BITRATE 3.3 Mbps

 

 

 

Transmission

Elapsed time rate

Current chapter number

Current title number

(for Audio CD, Video CD or SVCD playing without PBC)

TRACK 1TIME 00:08 EACH

Time mode

Current track elapsed time

Current track number

(for Video CD/SVCD playing with PBC)

TRACK 1TIME 00:08 PBC

PBC on status

Current track elapsed time

Current track number

To turn off the disc/time display Press DISPLAY.

33

Image 35
Contents 96% Mises en garde, précautions et indications diverses Table of Contents Introduction FeaturesSupplied accessories To stop/quit random playback in the middle Other convenient procedures, etcNumber indicates the procedural step Important cautions Safety precautionsFront panel Preliminary knowledgeNames of parts and controls Remote control unit Angle button 29 Infrared signal-emitting window$ Cancel button 26 Numeric buttonsRear panel Display windowPreference displays Operational PrinciplesOn-screen displays Opening displaysDuring Audio CD/MP3 CD During Video CD/SVCD Playback Play mode displaysTo prevent the monitor from burning out Screen Saver Status displaysTo select a track/title number How to use numeric buttonsOn-screen guide icons About invalid operation iconPlayable discs About discsPlayable disc types Disc structureTo connect to a TV Getting startedConnections Before making any connectionsRed White Audio cable not supplied Blue Green Red To connect to a TV with the component video input jacksEnabling the Component Video OUT Blue Green Red Component video cable Not suppliedRed White Audio cable not supplied Amplifier or receiver To connect to an audio amplifier or receiverTo connect to audio equipment with a digital input Precautions To install batteries in the remote control unitTo connect the power cord Precautions for the safe use of batteriesPress 0 OPEN/CLOSE to close the disc tray Basic operationsTurning on/off the unit Inserting and removing discsTo stop playback temporarily Basic playbackTo start playback To stop playback completelyTo resume playback Resuming playbackTo locate the beginning of the scene or song To memorize the interrupted positionPress Title or Menu Advanced operationsPlaying from a specific position on a disc To locate a desired scene from the DVD menuFor DVD Video During playback To locate a desired selection using 4 or ¢Use the numeric buttons to specify the number Use Cursor 2/3 to move to Time SEARCH, then press Enter Press Play ModeSEARCH, then press Enter Press EnterPress Digest To locate a desired scene from the display DigestUse the numeric buttons 0 to 9 to enter the time Press and hold 8 for more than 1 second Special picture playbackUse Cursor 5/∞/2/3 to select the desired scene Press Zoom To playback in slow-motion SlowTo zoom a scene Zoom Press 8, then use 1 / ¡Press 3 to start program play Changing the playback orderTo playback in the desired order Program Use Cursor 2/3 to move to Random Repeat playbackTo playback in random order Random To repeat the current selection or all tracks RepeatUnit locates a and starts repeat playback between a and B To repeat a desired part A-B RepeatAudio CD/Video CD/SVCD For Audio CD For Video CD/SVCD To quit repeat playbackTo quit A-B repeat playback To select a scene angle from the normal screen AnglePress Angle Use Angle or Cursor 2/3 to select the desired angleTo select the subtitle language Subtitle Changing the language and soundList display Angle For DVD Video For Video CD To change the audio language or sound AudioPress Audio Use Audio or Cursor 2/3 to select the desired audioTo simulate surround sound 3D Phonic Selecting the picture characterEnjoying virtual surround sound To select the picture characterTo turn off the disc/time display Press Display Checking the statusTo check the disc/time information Press Display To dim the brightness of the display windowTo check the DVD function status Dimning brightness of the display windowUnavailable functions Basic operations using the basic control buttonsMP3 CD playback About MP3 CD discProgram playback Track/Group selection using the numeric buttonsHow to select a Track or Group Advanced functionsDisc, random playback ends Random playbackYou can playback Groups on an MP3 CD disc in random order Window on the front panel. After playing all groupsYou can repeat playback of the current Group or all Groups Repeat playbackDisc/time information Use Cursor 2/3 to move to REPEAT, then press EnterLanguage Initial settingsHow to set preferences Selecting preferencesAudio Display System While points Country Code, use Limiting playback by childrenTo set Parental Lock for the first time On the TV screen To change the settings Parental LockPress Enter while holding down 7 on the remote control unit Screen display appearsUse the Cursor 5/∞ to move to YES, then press Enter Enter your 4-digit password using the numeric buttons 0 toCare and handling of discs Additional informationSymptom Possible case Remedy TroubleshootingSpecifications Appendix ATable of languages and their abbreviations Appendix BCountry/Area code list for parental lock Toll Free 1 800 Do not service the television yourselfFor customer use Limited WarrantyJVC 0702MZMCREJSC