JVC XV-LTR1 manual Checking the status, To check the disc/time information

Page 36

Advanced

operations

 

 

Advanced operations

THEATER

You can enjoy sound effects like in a major theater in Hollywood.

*When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear.

NOTES

The 3D PHONIC display will automatically disappear if you do not change the 3D PHONIC for 5 seconds.

To turn off the 3D PHONIC display manually, press

ENTER.

With a Video CD disc, if the Audio setting is set to L or R, you cannot activate the 3D PHONIC function (i.e the 3D PHONIC mode is fixed to OFF).

Conversely, when the 3D PHONIC function is active, changing the AUDIO setting to L or R from STEREO cancels the 3D PHONIC function.

The 3D PHONIC function works correctly when playing back discs recorded in the Dolby Surround or Dolby Digital 5.1-CH format.

It also works when playing back discs other than those above, but does not provide the correct effect.

The 3D PHONIC function does not affect the DTS or Dolby Digital bitstream signal from the DIGITAL OUT jack.

The sound effect will not be set or operate, even if 3D PHONIC is pressed, for the sound of DVD VIDEO discs recorded in Linear PCM.

When you set the 3D PHONIC function to on, the DOWN MIX and COMPRESSION settings in the AUDIO page of the preference display are disabled.

Checking the status

You can view the disc/time information, as well as the DVD functions status on the TV screen.

To check the disc/time information

OPEN

STANDBY/ON

/CLOSE

 

PLAY

3D

MODE

PHONIC CANCEL RETURN

 

1

2

3

 

 

4

5

6

 

 

7

8

9

 

10

0

+10

 

 

 

 

THEATER

 

ANGLE

SUBTITLE AUDIO POSITION

 

DIGEST

 

ZOOM

 

 

US

NEXT

 

PREVIO

 

 

 

4

¢

 

 

CLEAR

SELECT

STROBE

 

3

 

 

7

8

 

 

 

 

 

 

 

SLOW

SLOW+

 

 

 

 

 

 

 

1

¡

 

 

 

LE

 

ME

NU

 

TIT

 

 

 

 

 

5

 

 

 

 

5

ENTER

5

1

 

 

 

 

CH

OICE

 

 

LAY

 

 

DISP

REMOTE CONTROL

During playback

1 Press DISPLAY once for a Audio CD or Video CD disc, or twice for a DVD VIDEO disc.

The disc/time display appears on the TV screen.

(for DVD VIDEO)

TITLE 1 CHAP. 25 TIME 2:25:25 BITRATE 3.3 Mbps

Transmission rate

Elapsed time Current chapter number

Current title number

(for Audio CD or Video CD without playing PBC)

TRACK 1TIME 00:08 EACH

Time mode

Current track elapsed time

Current track number

(for Video CD playing with PBC)

TRACK 1TIME 00:08 PBC

PBC on status

Current track elapsed time

Current track number

To turn off the disc/time display Press DISPLAY.

34

Image 36
Contents 99,23/$5 Mises en garde, précautions et indications diverses Table of Contents Features Supplied accessoriesIntroduction Random Safety precautions Important cautionsPreliminary knowledge Names of parts and controlsFront panel Remote control unit Play Mode button 23, 27, 28 Infrared signal-emitting window$ Cancel button 3D Phonic buttonDisplay window Rear panelOperational Principles On-screen displaysOpening displays Preference displaysPlay mode displays To prevent the monitor from burning out Screen SaverStatus displays How to use numeric buttons On-screen guide iconsAbout invalid operation icon To select a track/title numberAbout discs Playable disc typesDisc structure Playable discsGetting started ConnectionsBefore making any connections To connect to a TVHow to make the Component Video OUT jacks active To connect to a TV with the component video input jacksConnect Y to Y, PB to PB, PR to PR correctly To connect to an audio amplifier or receiver To connect to audio equipment with a digital inputTo install batteries in the remote control unit To connect the power cordPrecautions for the safe use of batteries PrecautionRemote sensor +10Basic operations Turning on/off the unitInserting and removing discs Press 0 OPEN/CLOSE to close the disc trayBasic playback To start playbackTo stop playback completely To stop playback temporarilyResuming playback To locate the beginning of the scene or songTo memorize the interrupted position To resume playbackAdvanced operations To locate a desired scene from the DVD menuPress Title or Menu Use the numeric buttons to select the desired itemSee page 11 for details about how to use Numeric buttons Use the numeric buttons to specify the number¶ For DVD VIDEO/Audio CD During playback or while stopped Press Play Mode Press EnterUse Cursor 2/3 to move to Time SEARCH, then press Enter When you make a mistake To locate a desired scene from the display DigestUse the numeric buttons 0 to 9 to enter the time Press DigestSpecial picture playback Use Cursor 5/∞/2/3 to select the desired scenePress and hold 8 for more than 1 second To playback in slow-motion Slow To zoom a scene ZoomPress Zoom Press 8, then use 1/¡Changing the playback order To playback in the desired order ProgramPress 3 to start program play Repeat playback To playback in random order RandomTo repeat the current selection or all tracks Repeat Use Cursor 2/3 to move to RandomMode is selected, you cannot move To A-B To repeat a desired part A-B RepeatAudio CD/Video CD To quit repeat playbackTo select a scene angle from the normal screen Angle Press AngleUse Angle or Cursor 2/3 to select the desired angle To quit A-B repeat playbackChanging the language and sound To select the subtitle language SubtitleTo change the audio language or sound Audio Press AudioUse Audio or Cursor 2/3 to select the desired audio For Video CDSelecting the picture character Enjoying virtual surround soundTo select the picture character To simulate surround sound 3D PhonicChecking the status To check the disc/time informationDisc/time display appears on the TV screen To turn off the disc/time display Press DisplayTo dim the brightness of the display window To check the DVD function statusDimming brightness of the display window Press DisplayInitial settings How to set preferencesSelecting preferences LanguageAudio Display Remote control unit Limiting playback by childrenTo set Parental Lock for the first time SystemTo change the settings Enter your 4-digit password using the numeric buttons 0 toPress Enter while holding down 7 on the remote control unit Screen display appearsUse the Cursor 5/ ∞ to move To YES Then press Enter Buttons 0 toAdditional information Care and handling of discsTroubleshooting Symptom Possible case RemedySpecifications Appendix ATable of languages and their abbreviationsAppendix BCountry code list for Parental Lock Authorized Service Centers Limited Warranty JVC 0701AOMDTEJSC